How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Computer Engineer
Category: Computer
Satisfied Customers: 17287
Experience:  CISCO certified, Microsoft proficient, computing expert.
30970729
Type Your Computer Question Here...
Pete is online now
A new question is answered every 9 seconds

When I use the I pod and the docking unit to and try to turn

Customer Question

when I use the I pod and the docking unit to and try to turn on the power to the boom box the LED don't come on.so I check the power supply board and amplifier board components, like capacitors , diodes and all connection plus testing parts. but all parts OK. so can it be a software, program problem or with some small IC chip. 1-***-***-**** home 1-***-***-**** cell .
Submitted: 1 year ago.
Category: Computer
Expert:  Pete replied 1 year ago.

Hi Curtis,

Test the power supply voltages to ensure they are correct.

If they are, then it is likely either a switch/button fault or a software issue and the firmware may need to be reinstalled at the factory.

Related Computer Questions