How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Sudipto Your Own Question
Sudipto
Sudipto, Hardware Engineer
Category: Computer
Satisfied Customers: 5690
Experience:  Certificate Course In Computer Maintenance
15197395
Type Your Computer Question Here...
Sudipto is online now
A new question is answered every 9 seconds

My Gateway ZX4300 screen is blank

This answer was rated:

My Gateway ZX4300 screen is blank
Hi,
WELCOME TO JUST ANSWER!! My name isXXXXX will assist you to solve or identify your problem.

Do you hear any beep sound,when you power on the PC?
Customer: replied 6 years ago.
No beep sound.
Can you see the Gateway logo,when you power on the PC?
Customer: replied 6 years ago.
no logo at all
Ok,please disconnect the power cord from the PC and wait for 60 secs. and then try to power on and let me know.
Customer: replied 6 years ago.
Did as you instructed. Same result.
Do you see any light on the PC?
Customer: replied 6 years ago.
No light coming from the monitor. The on/off switch is lit and there is a button on the lower right hand corner that is also lit.
Ok,once again follow the steps below.

  1. Remove the unplug the AC adapter from the computer.
  2. Press and hold down the power button on the computer down for 30 seconds and then release the button.
  3. Plug in the AC adapter again, and power on the computer.
Customer: replied 6 years ago.
No success.
Then,this is a hardware problem and it seems to be the power section of the PC is defective and you have to repair the PC to resolve the issue.
Sudipto and 7 other Computer Specialists are ready to help you