How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask David L Your Own Question
David L
David L, Systems Engineer
Category: Computer
Satisfied Customers: 6614
Experience:  Microsoft & Cisco Certified with over 20 years experience
Type Your Computer Question Here...
David L is online now
A new question is answered every 9 seconds

kyocera km-4035 scanner settings We changed our subnet from

Resolved Question:

kyocera km-4035 scanner settings
We changed our subnet from at 192.168.1.XX to a 192.168.4.xx

We have the printer working but cannot scan. We are gettting a 503 error on the web interface. Need to change the IP address to the scanner side so it point to the correct PC. Can I do this on the machines console? or do you ahve to manage it through the web interface?
Submitted: 8 years ago.
Category: Computer
Expert:  David L replied 8 years ago.



Thank you for contacting Just Answer.


You can change the IP address settings on the machine's console by going to the printer menu, then selecting the interface section, then selecting the network interface then to TCP/IP on/off and there you can set the IP address.

David L and 3 other Computer Specialists are ready to help you