How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Claws224 Your Own Question
Claws224, IEEE Network Engineer
Category: Networking
Satisfied Customers: 1256
Experience:  IEEE, Microsoft
Type Your Networking Question Here...
Claws224 is online now
A new question is answered every 9 seconds

I am trying to connect my sleep number bed to my Wi Fi and

Customer Question

I am trying to connect my sleep number bed to my Wi Fi and the instructions state that my router (Netgear) has to be set at WPA2. How do I check to see if my router is set at WPA2?
Submitted: 1 year ago.
Category: Networking
Expert:  Kamil Anwar replied 1 year ago.

This is done by logging into the router's admin. You will need default gateway IP for this. Do you want me to connect with you remotely to do this for you? Thanks