How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Network Architect
Category: Networking
Satisfied Customers: 11865
Experience:  25+ Years Experience in Field. MCSE, ICCP, CNE, Greenbelt. Certified Network Engineer/Architect
Type Your Networking Question Here...
Michael Hannigan is online now
A new question is answered every 9 seconds

I installed AC2350 and enabled bridging mode but cant get

Customer Question

I installed AC2350 and enabled bridging mode but cant get access to
Submitted: 2 years ago.
Category: Networking
Expert:  Michael Hannigan replied 2 years ago.

Hello and Welcome. My name is Michael.

Here are the proper steps right from Netgear on how to setup your AC2350 as a bridge.

Please follow the steps and if you require any further help, let me know which steps from that link you are having problems with in order to assist you better.

Thank you.