How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike the Mac Medic Your Own Question
Mike the Mac Medic
Mike the Mac Medic, Consultant
Category: Networking
Satisfied Customers: 8996
Experience:  Network consultant for over 20 years.
Type Your Networking Question Here...
Mike the Mac Medic is online now
A new question is answered every 9 seconds

I have no modem, but just an internet cable and I don't

Customer Question

Hi - I have no modem, but just an internet cable and I don't know how to setup the router I just bought...
Submitted: 2 years ago.
Category: Networking
Expert:  Mike the Mac Medic replied 2 years ago.
I'm not sure how your direct apartment connection was working but make sure your ethernet port is setup for DHCP on IPv4.
1. ClickSystem Preferences > Network > Configure...
3. From the TCP/IP tab, select Using DHCP in the Configure IPv4 dropdown list.
4. Cllick Apply Now when done.
Then you can try the software or the web interface:
To log into the web GUI:
1. On your web browser such as Internet Explorer, Firefox, Safari, or Google Chrome, manually key in the wireless router’s default IP address:
2. On the login page, key in the default user name (admin) and password (admin).

Related Networking Questions