How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kamil Anwar Your Own Question
Kamil Anwar
Kamil Anwar, Certified Networking Engineer
Category: Networking
Satisfied Customers: 5276
Experience:  8+ Years of Experience. / CCNA (S), CCNA (W), CCNA (RS), MCTS, MBCs.
69350257
Type Your Networking Question Here...
Kamil Anwar is online now
A new question is answered every 9 seconds

I have a linksy booster RE 6500. it was connected to an

Customer Question

Hi I have a linksy booster RE 6500. it was connected to an old router that we got rid of. How do I reset the booster, so I can reconfigure it to our new router?
Submitted: 2 years ago.
Category: Networking
Expert:  Kamil Anwar replied 2 years ago.
Hello & Welcome to JustAnswer.
There is a reset button on the back of the router, it is a small button, you will need to use a unfolded paperclip or pin.
Press and hold this button for about five seconds to reset the extender to
its factory defaults.
See the manual below (pg. 2) for image showing where it is:
http://downloads.linksys.com/downloads/userguide/1224702174282/MAN_RE6500_LNKPG-00125_RevA01_EN.pdf
Let me know how it goes.
Thanks