Ask Computer Networking Questions and Get Answers ASAP
Welcome to the justanswer chat support, please let me know when you are ready to chat.
Or reset your router to factory defaults, use a pen or paperclip to press and hold the Reset button for approximately 15 seconds at the back of the router you will see a tiny button indicated as reset button, press it down until the light blinks. The router power should be turned on. Release the button and wait for the router to reboot.
now you can login to the router page.
If the reset is not done correctly then you will not be able to login to the router page
if I reset my router I am going to lose the connection to this PC?
but after it reboots you will gain access
okay - here goes!
or open this link as you are back on line
back on line?
what is the model number of the roter
right click on http://192.168.1.1 and from the drop down select open on a new tab.
or http://www.routerlogin.net or http://www.routerlogin.com
When prompted for a Username and Password, enter Username:adminPassword: password
"No Internet Connetion'
how are we connected now?
Now showing "Basic Settings'
now 'Updating Settings"
That is complete, but then it refreshes back to "Updated Settings"
did you saved the changes
it also openned up another window congratulating me on successfully installing my router
so that is a good
I think so.
Now trying to change default password
yes it is sir
Select Wireless Settings from the Setup menu in the left-hand navigation bar.
you will see the ssid(router name) and the password XXXXX not you may continue with next steps to assign a new password XXXXX the router
Under Wireless Network, enter your desired network name in the Name (SSID) box.Under Security Options, select WPA-PSK [TKIP] + WPA2-PSK [AES]. Under Security Options (WPA-PSK + WPA2-PSK), enter your desired network password XXXXX the Passphrase box.
WRITE DOWN or KEEP NOTE of your network name, security option and passphrase - you will require them to connect wireless computers and devices to your network.Click Apply to save the settings.
I hit apply and a dialog box drops down asking for my name and password?
what user name and password XXXXX I use?
it's not accepting admin and password
enter the default to login to the router console pageUsername:adminPassword: password
its a netgear router correct?
this is bizzarre
the reset didnt happen correctly then
press and hold down the reset button for 30 seconds while the router is on
have the same problem when I click on Wireless Settings
upgrade the firmware and then try
open this link and select the correct model and download the firmware
think we're good
one more quick thing
Please ask in case you need further support or have any question.
i am very sorry i have expertize in wireless cams
what is WPS?
In computer terms its Web Processing Service Interface Standard, a web service interface specification from the Open Geospatial ConsortiumIf your router question was answered to your satisfaction you may hit the accept button to reward the time.