How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ryan B. Your Own Question
Ryan B.
Ryan B., Network Specialist
Category: Networking
Satisfied Customers: 1775
Experience:  Comptia A+ certified, studied for Network+ Certification
Type Your Networking Question Here...
Ryan B. is online now
A new question is answered every 9 seconds no longer exists? where do i get the smart wizard

Customer Question no longer exists? where do i get the smart wizard to install the netgear 2000 universal range extender?
Submitted: 6 years ago.
Category: Networking
Expert:  Ryan B. replied 6 years ago.

Welcome to JustAnswer

- Make sure your PC is set to obtain IP address automatically (or DHCP).
- Make sure the status LED of PC to Extender is green and you have a valid IP address.
- Re-launch the browser and enter or
- If your PC supports IPv6, please disable it during installation
- If you’re still not able to access WN2000RPT, please configure your computer to a static IP address (, netmask is, and connect to to access WN2000RPT GUI.

If you need assistance with any of these steps please let me know