How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don Williams Your Own Question
Don Williams
Don Williams,
Category: Computer Hardware
Satisfied Customers: 18
Experience:  Network Support Technician at McKeesport Area School District
Type Your Computer Hardware Question Here...
Don Williams is online now
A new question is answered every 9 seconds

I am trying to make an image of a 1TB boot drive with the

Customer Question

I am trying to make an image of a 1TB boot drive with the SafetyDrill software on a OneTouch 4 mini (160GB capacity). I get an BMR error (MW2) 112 error code. Also says Drive write error (Error subcode 112). What is the cause of this error?
Submitted: 2 years ago.
Category: Computer Hardware
Expert:  Don Williams replied 2 years ago.

Hi my name is ***** ***** I will try to help you with this error. Your question states that you are trying to make an image of a*****on a drive that is only 160 gb capacity. Is this correct?