How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike, Consultant
Category: Clock Repair
Satisfied Customers: 3030
Experience:  I've been active in clock repair for 14 years - NAWCC member.
Type Your Clock Repair Question Here...
Mike is online now
A new question is answered every 9 seconds

I am looking for a replacement for movement W2114/W2115, The

Customer Question

I am looking for a replacement for movement W2114/W2115
JA: The Clock Technician will know what to do. Please tell me everything you can so the Clock Technician can help you best.
Customer: The unit I have has stopped working... replaced batteries but no results
JA: Is there anything else important you think the Clock Technician should know?
Customer: no
Submitted: 2 months ago.
Category: Clock Repair
Expert:  Mike replied 2 months ago.

Hi, My name is ***** ***** it is my pleasure to assist you. I get this a lot in my clock repair shop. The switches are for different chime tones. The pendulum is separate it is basically just for looks. First make sure the battery contacts are clean. Next check the battery contacts to see if the wires are loose or has come disconnected. The manufacturer states that their clocks work best with Duracell batteries. Next the bad thing about these quartz movements is that they are encased in plastic and can not be opened to work on them to gain access to the circuit board or the plastic gears that run the hands, it is cheaper to replace the movement yourself than to bring the clock to a repair shop because that is what they will do and that is what I tell my customers that come into my shop to save them money. They are easy to replace and are very inexpensive. If the options above do not work and you decide to replace the quartz movement yourself you can order your part from one of the companies I use to order parts from just give them the make and model of your clock and the movement number which should be located on the back of the movement and if you don't feel comfortable doing this yourself if you want I can find a clock repair company in your area just let me know your location and by what major cities and I'll find a few in your area. Thanks Mike.


If you need further assistance, please don't hesitate to ask.
PLEASE remember if you're satisfied with my answer rate my answer
by using the STARS so I will be compensated by JustAnswer
for helping you.*****br />Culver City, CA 90230 USA
    Toll free: 1,888,8CRAFTS
    Hours: Monday to Friday, 8AM to 4PM PST
    Box 12700
    Scottsdale, AZ 85267 U.S.A.
    Monday through Friday Hours: 8:00 am - 4:00 pm (MST)
    2209 NW Mill Pond Rd.
    Portland Or 97229
    order line: 1,800,566,7576

    Gone to Pieces
    (battery operated quartz movements only)
    6819 Rt 259 Hwy
    Homer City, PA 15748
    order line: 1,800,205,7204
    PO Box 339 -*****br />Huntington MA 01050

    Call us (toll free):(###) ###-####strong>


    Moore Clocks LLC

    1711 Old York-Hampton Hwy

    Yorktown, VA, 23692

    SKU: HM-0024

    Quartz Clock Movement with Westminster and Ave Maria

    • Hermle quartz 2215, 2115, 2114, 2214 are no longer made by Hermle.
    • Made by Kieninger in Germany with same dimensions as Hermle, Howard Miller and Keininger.
    • It comes with auto night shutoff, volume control.
    • Your original hands will fit the new movement.
    • Chime and strike are integrated with the time.
    • No adjustments are needed when changing your batteries or time.
    • Fits your Pendulum Rod.
    • 2215 Pendulum Driven
    • 2115 Non-Pendulum Driven
    • 2114 Non-Pendulum
    • 2214 Pendulum Driven
    • Runs Off Two C-cell Battiers

    Available Hand Shaft Lengths:

    • 15mm- For dials that are 1/8" dial thickness or less
    • 20mm- For dials that are 3/8" dial thickness or less
    • 3 Year Warranty
    • Dimensions: 4 1/2L x 2 1/4W (Same as Hermle)
    • Ships Same Day M-F
    Expert:  Mike replied 2 months ago.

    Hi, I was wondering if you need further assistance with your clock? Thanks Mike

    PLEASE remember if you're satisfied with my answer rate my answer
    by using the stars so I will be compensated by JustAnswer
    for helping you.

    Related Clock Repair Questions