Have Clock Problems? Ask a Clock Expert and Get Answers ASAP
Hi, My name is ***** ***** it is my pleasure to assist you. First make sure your weights are in the proper order. If the weights are not marked the heaviest weight goes on the RIGHT it runs the chimes the next heaviest in the CENTER it runs the pendulum the last weight goes on the LEFT it runs the strike. To rethread the chains if you look up under the dial face you will see the sprocket the chain hangs from they will only turn freely one way so what you want to do is when you start to rehang the chain you would want to hang the end of the chain that holds the weight down the opposite way the sprocket turns so that when you hang the weight onto chain the weight will not crash to the bottom of the clock. Make sure that there are know kinks or twists in the chain you can take a piece of wire that I pictured below, feed the wire down the side the weight hangs from take the end of the chain the weight hangs on and pull the chain up & over the sprocket to feed about 8 to 12 inches down then hang the weight onto the chain. Try this option out and let me know what happens and if you do not feel comfortable doing this yourself let me know your zip code location and I'll find a clock repair company for you. Thanks Mike
If you need further assistance, please don't hesitate to ask.PLEASE remember if you're satisfied with my answer rate my answerby using the STARS so I will be compensated by JustAnswer for helping you.
Hi, I was wondering if you need further assistance with your clock? Thanks Mike
PLEASE remember if you're satisfied with my answer rate my answerby using the stars so I will be compensated by JustAnswerfor helping you.