Classic Car

Have classic car questions? Ask an Expert.

Ask an Expert,
Get an Answer ASAP!

Related Classic Car Questions
Have 1976 450 slc, confusion on the valve noise. I
Have 1976 450 slc, confusion on the valve noise. I understand what all the parts are involved, and have the correct tools to do the job. Here are my questions, 1. if I have loose rocker arm should I a… read more
eurotec
eurotec
Vice President / Manager
Associate Degree
11 satisfied customers
I just put a new cam and lifter kit in a 455 engine. Im getting
I just put a new cam and lifter kit in a 455 engine. I'm getting oil to the lifters but not thru the push rods to the rocker arms. I've worked on cars all my life and this has got me stumped!… read more
Don - Mo Lurch
Don - Mo Lurch
Classic Car Mechanic
Vocational, Technical or Trade Scho
957 satisfied customers
Pontiac Catalina: Hello, My problem is with the oiling system
Hello, My problem is with the oiling system on a 1972 pontiac catalina with a 350 pontiac engine. I had rebuilt the engine and after installing the new camshaft and lifters I am not getting any oil up… read more
Pete B
Pete B
Repair Shop Owner
Associate Degree
125 satisfied customers
chevy: hydraulic lifters..clicking..trick to getting them adjusted
I purchased a set of lunati performance replacement hydraulic lifters flat tappet for a small block chevy. We are having trouble getting them to stop clicking, they are really noisey. Is there a trick… read more
DaleStockstill
DaleStockstill
Retired
Vocational, Technical or Trade Scho
993 satisfied customers
1951 cadillac: overhauled..cylinder head..exhaust manifold and floor
Help! I have a 1951 Cadillac 331ci engine that has been completely overhauled. Problem: there is no oil gitting up to the rocker arms or push rods on the left cylinder head. The right side is getting … read more
Don - Mo Lurch
Don - Mo Lurch
Classic Car Mechanic
Vocational, Technical or Trade Scho
957 satisfied customers
Worth fixing/ replacing a ticking lifter on a 1970s engine, or am I
Is it worth fixing/ replacing a ticking lifter on a 1970's engine, or am I better putting in a new crate motor?… read more
DaleStockstill
DaleStockstill
Retired
Vocational, Technical or Trade Scho
993 satisfied customers
oil pump..80lbs of oil pressure on a mechanical gauge..cylinder
I have a 1972 400 big block It has a fresh rebuild at a professional shop. When I turn the oil pump with a drill it has 80lbs of oil pressure on a mechanical gauge but it does not get any oil to the c… read more
Bill Barrow
Bill Barrow
Vocational, Technical or Trade Scho
139 satisfied customers
3 GM: a GM motor stamped on the drivers side block
Trying to find out the year and any other information on a GM motor stamped on the driver's side block: Hecho en Mexico 3 GM 10066036… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
1,314 satisfied customers
1968 Dodge Coronet: Specs..intake, Isky 280H cam, MP electronic ign
Hi-- I have a 1968 Dodge Coronet. I just installed a 1971 360 in it. Specs are: 10:1 pistons, Edelbrock heads and intake, Isky 280H cam, MP electronic ign, etc. This engine ran great for about 150 mil… read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
A 1956 chev 210 sedan with new motor mounts that allow engine..oil pan
xhello i have a ramjet 350 350hp fuelinjected crate engine i put it in a 1956 chev 210 sedan with new motor mounts that allow engine to sit 3/4 inch ahead problem is oil pan is hitting centrelink bar.… read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
383 chrysler: rocker arms..hollow push rod and lifter to match
if you instal roller rocker arms on a 383 chryser engine do you have to instal hollow push rod and lifter to match… read more
Don
Don
Classic Car Mechanic
Vocational, Technical or Trade Scho
951 satisfied customers
1968 DODGE CORONET: CYLINDER..torque..INTAKE..NEED THE FIRING ORDER
IM WORKING ON A 1968 DODGE CORONET, CHANGING THE CYLINDER HEADS FOR A CUSTOMER. I NEED TO GET TORQUE SPECS. ON THE INTAKE BOLTS HEAD BOLTS AND I ALSO NEED THE FIRING ORDER. I HAVE NO MANUALS THAT OLD … read more
Arench
Arench
President
CT State GED w/ Honors
1 satisfied customers
Headers..intake..some Z28 305 heads, what type of rockers should Irun
I have a stock L81, with shorty headers, true duals, and a edelbrock dual plane performer intake. I just purchase some Z28 305 heads, what type of rockers should Irun on these heads?… read more
DaleStockstill
DaleStockstill
Retired
Vocational, Technical or Trade Scho
993 satisfied customers
383 magnum: Just installed 516 casting cylinder heads. Wont start.
I have a 1971 superbee 383 magnum. Just installed 516 casting cylinder heads. Won't start. I was told push rods may be the problem--it has the 71 push rods now.… read more
Rick Armour
Rick Armour
Car Restorer
Vocational, Technical or Trade Scho
286 satisfied customers
1972 dodge dart: rebuilt..lifters ticking thay..hydraulic..cam
I have 1972 dodge dart 340 jest rebuilt but having a troble with lifters ticking thay are hydraulic lifters and roller rockers and hollow push rods from comp cam… read more
Carfix4you
Carfix4you
Lead Technician
Associate Degree
412 satisfied customers
Chevrolet: small block..my rocker arms, but my oil pressure gauge..psi
I have an older small block chevrolet, i am getting no oil to my rocker arms, but my oil pressure gauge is reading approx 68 psi, what would cause any of the rocker arms to recieve any oil?… read more
Don
Don
Classic Car Mechanic
Vocational, Technical or Trade Scho
951 satisfied customers
364 buick: rebuilt..oil pressure..oil pump need vacume..fitted
hello...just rebuilt full recon 364 buick nailhead... not getting oil up top to rockers...have 50 pound of oil pressure..does the oil pump need vacume of any kind?... checked all welsh plugs are fitte… read more
Don - Mo Lurch
Don - Mo Lurch
Classic Car Mechanic
Vocational, Technical or Trade Scho
957 satisfied customers
GTO: edelbrock 600 cfm (rebuilt) carb on..run fine..rpm..fuel pressure
I have a ''67 GTO that I recently installed an Edelbrock 600 cfm (rebuilt) carb on. Now the engine seems to run fine except at idle where it idles OK for a few minutes then starts stumbling (rpm down … read more
Roadsofa
Roadsofa
Owner RJ's Performance
Vocational, Technical or Trade Scho
64 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Dr. Hamman

Dr. Hamman

Technician

2,436 satisfied customers

I have 30 years experience repairing, restoring, and customizing cars, and pickup trucks.

Don - Mo Lurch

Don - Mo Lurch

Classic Car Mechanic

957 satisfied customers

Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.

Don

Don

Classic Car Mechanic

951 satisfied customers

30 years of experience and we have 4 classic cars our selfs

Mike S.

Mike S.

Classic Car Mechanic

880 satisfied customers

A.S.E. certified with 25+ years experience.

K. Wiggins

K. Wiggins

Classic Car Mechanic

431 satisfied customers

ASE Certified Technician, Associates Degree in Automotive Technology, 15+ years in the trade

Dave Nova

Dave Nova

ASE Technician

415 satisfied customers

ASE Master Certification. GM World Class Certification

Road Side Jerry

Road Side Jerry

Auto Mechanic

280 satisfied customers

classic car mechanic

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x