Classic Car

Have classic car questions? Ask an Expert.

Connect one-on-one with {0} who will answer your question

Related Classic Car Questions
I thought that I had this question answered once before,
I thought that I had this question answered once before , but, I could not find it in my answers ...so ... What is a rough estimate of time needed to do a frame off complete restoration of a 1966 Corv… read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
All of my turn signals on my 1966 f100 ford truck works, but
All of my turn signals on my 1966 f100 ford truck works, but only flashes 6 times then they don't clash any more. I got to wait about 2 minutes then turn my signal light and it will repeat it self fla… read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
Ford F-250: I have a 1964 or 1965 f-250 originally it had no
I have a 1964 or 1965 f-250 originally it had no power steering, someone put it in before me and I want to replace it but I am not sure what the original equipment would have been that came with anoth… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
I just bought a 1966 Chevelle SS 396 fully restored from a
I just bought a 1966 Chevelle SS 396 fully restored from a dealer and I have zero information on this car. As far as dates of restoration and what exactly was done. Is there anyway to find out? It onl… read more
Don - Mo Lurch
Don - Mo Lurch
Classic Car Mechanic
Vocational, Technical or Trade Scho
957 satisfied customers
Galaxie 500 Conv.: I have a 1966 ford galaxie 500 convertible
I have a 1966 ford galaxie 500 convertible that I'm restoring. The frame is in pretty ruff shape(corrosion) what other year and make of ford frames could I use?… read more
Virtual Wrench
Virtual Wrench
Owner of LJ Auto Repair 37 years
Associate Degree
14,420 satisfied customers
1977 Ford F100: rear end gears would you recommend to install..u.
What high performance engine,transmission and rear end gears would you recommend to install in a 1977 Ford F100 p/u.?… read more
Tom
Tom
Professor, Auto Technology
Bachelor's Degree
862 satisfied customers
1966 Ford F100: carb is getting fuel but its not firing up
I am going to look at a 1966 Ford F100 Thats for sale. The owner states it turns over and the carb is getting fuel but its not firing up. Other than the obvious(plugs, wires, dis. etc.) What should I … read more
Dale Stockstill
Dale Stockstill
Retired
Vocational, Technical or Trade Scho
1,223 satisfied customers
1969 F100: power steering..tires..rims..steering box
I want to either convert my 1969 F100 to power steering or make the manual steering easier. I have large truck tires on the truck (Split rims) and the manual steering box is sloppy. What would you do … read more
Dale Stockstill
Dale Stockstill
Retired
Vocational, Technical or Trade Scho
1,223 satisfied customers
1966 F100 Pickup: interior..bench seat..stearing..air conditioning
I just purchased a really clean (except for interior, bench seat rips) 1966 F100 Pickup Truck. I am interested in adding power stearing and air conditioning. Any ideas, prefer something that will look… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
1968 coupe: Mustang..3 spd tranny to put..motor mounts..bolt
I've purchased a 1968 coupe to restore with my son, it had no drivetrain and is a complete fixer upper. First problem : I bought a 1966 Mustang 200 engine and 3 spd tranny to put in the 68'. Found the… read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
I just bought a 1956 Ford F100. Im a newbie at DIY and restoration
I just bought a 1956 Ford F100. I'm a newbie at DIY and restoration and currently the truck is in another city. A mechanic is checking it out there, with the idea that it just needs enough work done s… read more
chargeroz
chargeroz
cert 3 automotive engineering
18 satisfied customers
69 Ford F100: ton..short bed..The problem is electrical
I have a '69 Ford F100 1/2 ton short bed P/U. It will not start. The problem is electrical. I have a fully charged battery and have jumped the selenoid on the firewall to eliminate that. There seems t… read more
Don
Don
Classic Car Mechanic
Vocational, Technical or Trade Scho
951 satisfied customers
1979 F100: make/model..interior..installing a ac as well
What make/model can replace a 1979 F100 dash? I am restoring and would like to modernize the interior. I have a 79 F100 stepside, but it needs the dash replaced and i will be installing a AC as well. … read more
phil
phil
High School or GED
265 satisfied customers
1965 f100: standard trans but now c6, it has no speedo cable, I..hooks
I've got a 1965 f100 w/352 was standard trans but now c6, it has no speedo cable, I'm looking for a picture of where the cable hooks into trans.. I found a Co. in Calif that markets a cable for 1948-1… read more
Don - Mo Lurch
Don - Mo Lurch
Classic Car Mechanic
Vocational, Technical or Trade Scho
957 satisfied customers
1966 F100: water pump..the crank pulley and the alternator pulley
I have a 1966 F100 stepside. The engine is not the original but I do know it is a 300cid. My problem is that the water pump pulley does not line up with the crank pulley and the alternator pulley. I u… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
I have a 1966 6cyc. mustang. It has 14 4 lugs wheels.
I have a 1966 6cyc. mustang. It has 14' 4 lugs wheels. The selection for custom whells are very limited. It is possible to convert to 15" wheels 5 lug? What is involved in changing to 5 lugs drums. Ar… read more
Rick Armour
Rick Armour
Car Restorer
Vocational, Technical or Trade Scho
286 satisfied customers
1966 f100: ignition switch..push..assembly..the key cylinder
i have an 1966 f100 ignition switch I need to replace. The switch has a push and turn escutheon - But i can only get the whole assembly to turn. How do i seperate the key cylinder and the switch back?… read more
Arench
Arench
President
CT State GED w/ Honors
1,484 satisfied customers
I have a 1957 Ford f 600 flat bed dump truck. operational ...
I have a 1957 Ford f 600 flat bed dump truck. operational weight on thr front axel is often in excess of 5,000 lbs. Is it possible to replace the manual steering system with a power steering system an… read more
Roadsofa
Roadsofa
Owner RJ's Performance
Vocational, Technical or Trade Scho
64 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Dr. Hamman

Dr. Hamman

Technician

2,436 satisfied customers

I have 30 years experience repairing, restoring, and customizing cars, and pickup trucks.

Don - Mo Lurch

Don - Mo Lurch

Classic Car Mechanic

957 satisfied customers

Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.

Don

Don

Classic Car Mechanic

951 satisfied customers

30 years of experience and we have 4 classic cars our selfs

Mike S.

Mike S.

Classic Car Mechanic

880 satisfied customers

A.S.E. certified with 25+ years experience.

K. Wiggins

K. Wiggins

Classic Car Mechanic

431 satisfied customers

ASE Certified Technician, Associates Degree in Automotive Technology, 15+ years in the trade

Dave Nova

Dave Nova

ASE Technician

415 satisfied customers

ASE Master Certification. GM World Class Certification

Road Side Jerry

Road Side Jerry

Auto Mechanic

280 satisfied customers

classic car mechanic

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x