Classic Car

Have classic car questions? Ask an Expert.

Connect one-on-one with {0} who will answer your question

Related Classic Car Questions
I have a 1955 chev belair w/ 350/350 speedo inacurate has
i have a 1955 chev belair w/ 350/350 speedo inacurate has p2056515 tires can u tell if the rear end had a standard ratio rear also trying to get the correct speedometer driven gr … read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
Thunderbird: I have a 1956 thunderbird that had an off-body
I have a 1956 thunderbird that had an off-body restoration ten years ago, I have decided to put in a fuel injected 302 cobra with 350 hp and a 4 speed aod. The current gear ratio is 331 what do you th… read more
K. Wiggins
K. Wiggins
Classic Car Mechanic
Associate Degree
431 satisfied customers
Oldsmobile Cutlass Turnpike Cruiser: With a 1967 Oldsmobile
With a 1967 Oldsmobile Turnpike Cruiser What is the smart thing to do to get even more torque/hp at low rpm. It seems that headers that will fit without modification (to the car/headers) is not availa… read more
Dr. Hamman
Dr. Hamman
Technician
Vocational, Technical or Trade Scho
2,436 satisfied customers
Corvette: small cam, small 1500 stall converter..gears..acceleration
I have a 1974, 454, Corvette, Turbo 400, 10-1 pistons, small cam, small 1500 stall converter. I want to change the rear end gears and am on the fence between 370 and 411. I seldom drive on the freeway… read more
Dale Stockstill
Dale Stockstill
Retired
Vocational, Technical or Trade Scho
1,034 satisfied customers
1974 chevrolet: years, makes, models drive shafts will fit my truck?
I have a 1974 chevrolet super cheyenne 20 truck with no drive shaft. What other years, makes, models drive shafts will fit my truck?… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
1956 Chevy Bel Air: to be a differential..upper front drivers side
I have a 1956 Chevy Bel Air that is outfitted with what seems to be a differential that is not stock for that year. The numbers are located on the upper front driver's side and are as follows: 1180 (t… read more
JHoop
JHoop
Owner,Technician
High School or GED
5,425 satisfied customers
1954 chevy bel air: replace my rear wheel bearings..axle out
I need to replace my rear wheel bearings on my 1954 chevy belair and i need to know how to pull the axle out… read more
Dale Stockstill
Dale Stockstill
Retired
Vocational, Technical or Trade Scho
1,034 satisfied customers
77 F150: CO. 460/4 speed/4x4..big block..driven..test drove
My uncle is bringing me my new '77 F150 from CO. 460/4 speed/4x4. I don't have any big block driving experience yet so I don't have the answers. I've had, and driven '78's and '79's with the 351m and … read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
chev..rear end..15x8.5 wheels and my tire size is 275/60r15..mounting
I have a 1956 chev sedan.And my questions are to do with the over all width of the rear end. I have 15x8.5 wheels and my tire size is 275/60r15 in measuring between the wheel mounting surface on each … read more
Dr. Hamman
Dr. Hamman
Technician
Vocational, Technical or Trade Scho
2,436 satisfied customers
54 chevy: clutch..the trans mount is worn down no rubber..first gear
my 54 chevy powerglide was changed to a manuel trans three on the tree the clutch and pressure plate have been redone three times frist gear skips like its not grabbing pressure plate looks good the t… read more
Mike S.
Mike S.
Classic Car Mechanic
Vocational, Technical or Trade Scho
880 satisfied customers
67 pontiac bonneville: with factory cruise control..steep hills
i have a 67 pontiac bonneville with factory cruise control and it doesn't set properly sence i installed finned aluminum valve covers. it holds speed properly once it finally grabs ahold. it will even… read more
RIP ROBERT
RIP ROBERT
OWNER
High School or GED
761 satisfied customers
Brougham: make it possible to cruise at 65 MPH...faster than..axel
I have a 1934 Desoto Brougham, which is in show condition. What can I do to make it possible to cruise at 65 MPH. The engine seems like it is turning faster than it should . Is it possible to change t… read more
Don
Don
Classic Car Mechanic
Vocational, Technical or Trade Scho
951 satisfied customers
54 chevy: ton..front hubs..highway gears..change from springs original
i have 1953 1/2 ton with 54 chevy front hubs 5 hole want rear end to match up but highway gears can i keep original rear end with different 3rd member gears and 5 hole axels or do i change complete re… read more
John Phillips
John Phillips
Bachelor's Degree
22 satisfied customers
1988 chevy camaro: rear end ratio..highway..differential..tires
I have a 1988 chev camaro, just had a 330 horse engine buildt, my question is the rear end ratio is stock 277 highway gear. What would you recomend for differential to match my 330 horse engine. I wou… read more
ASEMaster35yrs
ASEMaster35yrs
Vocational, Technical or Trade Scho
2,061 satisfied customers
10 pickup: speedometer gear..gears..Tires are 15 Any idea..driven
I just bought a '67 GMC C-10 pickup and found the speedometer gear is missing. It is a 3 speed Saginaw transmission and gears are 3.73. Tires are 15" Any idea what size driven gear I need? Thanks in a… read more
Don
Don
Classic Car Mechanic
Vocational, Technical or Trade Scho
951 satisfied customers
excellent: Roadster..I hear a grinding sound from the rear wheels
HELP ! I am the proud owner of a 1962 T-Bird Sports Roadster, in excellent condition ... until today . I hear a grinding sound from the rear wheels, only when I make a turn ( right or left ). It's an … read more
AutoDoc
AutoDoc
Shop Owner
Bachelor's Degree
400 satisfied customers
4 chevy truck: gear ratio from 4.1 to 3.1 and change the wheels..eng
1951 3/4 chev truck what has to be done to change the gear ratio from 4.1 to 3.1 and change the wheels from a 8 bolt to a 5 bolt speed of truck with 235 eng about 45 to 50 has a 4 speed on the floor w… read more
Rick Armour
Rick Armour
Car Restorer
Vocational, Technical or Trade Scho
286 satisfied customers
Toronado: V..8 transaxle..addition to the fuel injection conversion
I mis-stated the final drive ratio desire. I actually was wanting to know if the final drive ratio can be DECREASED on the Toronado V-8 transaxle and, if so, how to arrange this. If not, is there any … read more
Dr. Hamman
Dr. Hamman
Technician
Vocational, Technical or Trade Scho
2,436 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Dr. Hamman

Dr. Hamman

Technician

2,436 satisfied customers

I have 30 years experience repairing, restoring, and customizing cars, and pickup trucks.

Don - Mo Lurch

Don - Mo Lurch

Classic Car Mechanic

957 satisfied customers

Heavy Line Mech-, Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.

Don

Don

Classic Car Mechanic

951 satisfied customers

30 years of experience and we have 4 classic cars our selfs

Mike S.

Mike S.

Classic Car Mechanic

880 satisfied customers

A.S.E. certified with 25+ years experience.

K. Wiggins

K. Wiggins

Classic Car Mechanic

431 satisfied customers

ASE Certified Technician, Associates Degree in Automotive Technology, 15+ years in the trade

Dave Nova

Dave Nova

ASE Technician

415 satisfied customers

ASE Master Certification. GM World Class Certification

Road Side Jerry

Road Side Jerry

Auto Mechanic

280 satisfied customers

classic car mechanic

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x