How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dr. Hamman Your Own Question
Dr. Hamman
Dr. Hamman, Technician
Category: Classic Car
Satisfied Customers: 2436
Experience:  I have 30 years experience repairing, restoring, and customizing cars, and pickup trucks.
Type Your Classic Car Question Here...
Dr. Hamman is online now
A new question is answered every 9 seconds

How to remove a water distribution tube from a 6 cylinder

Customer Question

How to remove a water distribution tube from a 6 cylinder chrysler motor. No luck so far.
Submitted: 10 months ago.
Category: Classic Car
Expert:  Kavey replied 10 months ago.

Hello. My name is ***** ***** I will be helping you today.

These get really rusted in and many times its just not possible. Many of them end up having to be driven out by putting a hole in the back of the block and driving it out from the back with a long punch and hammer.

If its rusted in chances are yours is going to be one of them.

Sorry for the bad news but please keep in mind when you rate my service I didnt neglect this engine all these years. I am just the one delivering the news.