Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
What is the orientation of the oil squirter hole in the 3.5
what is the orientation of the oil squirter hole in the 3.5 sohc (2005) Pacifica … read more
Joe Prestia
Joe Prestia
Automotive Repair Specialist
1,089 satisfied customers
I need help with a weird problem I'm having, I'm rebuilding
I need help with a weird problem I'm having, I'm rebuilding my engine and in some of the pistons there is stiffness in the wrist pin and piston. Like, it doesn't just flip over when you set it down li… read more
Roy
Roy
shop foreman
Associate Degree
5,276 satisfied customers
I was able to get a 1 -1/16 crank bolt out of another 1998
I was able to get a 1 -1/16 crank bolt out of another 1998 gran am. Mine is probable in my garage hidden untill I find it. Now I have a new problem. It concerns the 8mm bolt that goes thru the timing … read more
David Gieswein
David Gieswein
Lead Technician
ASE Master certified
130 satisfied customers
1996 Plymouth Grand Voyager 3.0 Liter I have installed a new
1996 Plymouth Grand Voyager 3.0 Liter I have installed a new coil, a new crank sensor, still no power to plugs or coil. The fuel pump and automatic shutdown relays seem to be working properly. I'm not… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
39,799 satisfied customers
Chrysler Duster: 1993 Duster, 3.0. Spark plug has out
1993 Duster, 3.0. Spark plug has blown out 2 times..rear bank. A mechanic told me a heli coil will blow out also...needed to have head removed to repair properly. There has to be a better way. Purchas… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,739 satisfied customers
Chrysler 300C: My 2006 Chrysler 300 C 5.7 liter Hemi had to
My 2006 Chrysler 300 C 5.7 liter Hemi had to be towed to the dealer last week. After driving all day, I stopped to drop some pkgs off at fedex and when I got out, the car would not start. I did a quic… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,688 satisfied customers
Chrysler 300: I have new pistons but im usng my old rods is
I have new pistons but im usng my old rods is there any certain order or way to reapply the new pistons on my old rods once i remove the old pistons ?… read more
Don - Mo Lurch
Don - Mo Lurch
Aftermarket & Factory Electronics
Vocational, Technical or Trade Scho
578 satisfied customers
Chrysler 300m special: My chrysler 2004 3.5 vin K motor has
My chrysler 2004 3.5 vin K motor has locked up! I pulled the timing cover, belt okay, I dropped the oil pan and cover, no broken parts. I can rotate the crank by hand, when the the two rear pistons re… read more
K. Wiggins
K. Wiggins
ASE Certified Technician
Associate Degree
3,964 satisfied customers
Chrysler Town and Country: What is the average cost to replace
What is the average cost to replace an engine in a 2004 Chrysler Town and Country with 3.8 L V-6? I have a quote to fix a burned valve, but it seems high so am wondering why not replace entire engine?… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
15,079 satisfied customers
2004 Chrysler Sebring: rebuilt engine..Mechanics..$50 to $60 per hour
About how much should the labor charges be to have a new or rebuilt engine installed in a 2004 Chrysler Sebring. Mechanics in my area charge $50 to $60 per hour.… read more
Canadafix
Canadafix
Auto shop owner
Vocational, Technical or Trade Scho
1,507 satisfied customers
2003 Chrysler Sebring: 2.7 V-6..putting new..crankshaft..rod bearing
Dear Sirs--I bought a 2003 Chrysler Sebring convert with a 2.7 V-6. The motor was apart--I'm putting new connecting rods on the original pistons (I did not have the original rods). I see that the rods… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,021 satisfied customers
Pt cruiser turbo: all factory sensors cam..crank..alignment
hello keep getting code p0344 for 03 pt cruiser turbo pretty much change all factory sensors cam and crank and cam magnet, checked timing alignment 3 times its ok updated pc. problem started after rep… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,030 satisfied customers
limited: I race a 93 plymouth Duster with a 3.0L SOHC...rpm..RPMs.
I race a 93 Plymouth Duster with a 3.0L SOHC. I have a large RPM problem with the computer.It is limited 6000 RPMs. I need 7000! I am going to try to put a computer out of a 2.5L V6 Chrysler that is 7… read more
Doug in North Carolina
Doug in North Carolina
Automotive Service Technician
Vocational, Technical or Trade Scho
301 satisfied customers
Chrysler crossfire: What makes the compression ratio different..boost
What makes the compression ratio different on in the Chrysler Crossfire 3.2L N/A than the Chrysler Chrossfire 3.2L SRT-6? What do I need to change in my 3.2L N/A to allow it to handle as much boost as… read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
Engine Head to fail..head gasket being blown and/or engine overheating
Is it possibe for an Engine Head to fail without the head gasket being blown and/or engine overheating?… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
Voyager: plymouth..Now a constant pinging/knocking noise
93 Plymouth Voyager. Son ran it with no oil. Now a constant pinging/knocking noise from engine (will this go away?). Compression is much lower. Had an oil leak for a long time and a bad valve gasket. … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,602 satisfied customers
voyager: 3.0L..new pistons with new wrist pins..rods..same cylinder
On a 1998 Plymouth voyager, 3.0L I am doing a complete overhaul. I am installing new pistons with new wrist pins. Marked all the connecting rods (old) to reinstall in the same cylinder, but forgot to … read more
David Dill
David Dill
Master Level Chrysler Technician
High School or GED
834 satisfied customers
Neon: rod..cracked..It also put a hole in the balance shaft assembly
my sons srt4 (neon) broke a rod. The rod damaged the cradle that holds the crank(cracked) It also put a hole in the balance shaft assembly and the oil pan(fixable) My question is what motors can I get… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

578 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

729 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

121 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

garrtim

garrtim

service manager

1,116 satisfied customers

20+ years chrysler certified

Amedee

Amedee

Chrysler Technician

1,081 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x