Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
Oil spraying over intake manifold when hard accelerating.
oil spraying over intake manifold when hard accelerating … read more
J Hall
J Hall
retired
none
198 satisfied customers
It will randomly start to make a bubbly sound and coolant
it will randomly start to make a bubbly sound and spit coolant from the overflow blowout tube to the ground but temp say normal iv bleed the air changed everything down to the head witch was not warpe… read more
Chris
Chris
16,356 satisfied customers
I have an 05 turbo pt Cruiser, 2.4 L, 4 cylinder Turing
I have an 05 turbo pt Cruiser, 2.4 L, 4 cylinder Turing Edition. It beeps twice about 5 seconds after I start the engine. Then the check engine light comes on. After driving it for a little while, it … read more
david carrier
david carrier
102 satisfied customers
I have a 2005 pt cruiser 2.4 turbo code p0016 and p0344
I have a 2005 pt cruiser 2.4 turbo code p0016 and p0344 crank will sync on start up thats it. I have checked cam signal is normal for idle but crank sensor signal is reading for 2500 rpm im sure this … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,788 satisfied customers
CODES P0700 P0613 P1604 JUST HAD PCM REBUILT DIDNT FIX.
CODES P0700 P0613 P1604 JUST HAD PCM REBUILT DIDNT FIX … read more
Chris
Chris
16,356 satisfied customers
I have a 05 Cruiser. Changed the manifold gaskets and the
I have a 05 Cruiser. Changed the manifold gaskets and the upper and lower intake gaskets. Now it will not start. Only had 1 code: P0522 which is oil pressure and it went away but it still will not sta… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,500 satisfied customers
NOT GETTING JUICE TO GAS TANK TESTED PUMP IT IS GOOD. JUST
NOT GETTING JUICE TO GAS TANK TESTED PUMP IT IS GOOD … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,428 satisfied customers
05 pt died like,ran out of fuel turns over code po340 showes
05 pt died like,ran out of fuel turns over code po340 sho***** *****ged cam sensor doent start even aftet clearing code po340 showes back … read more
Eric
Eric
Retired
N/A
37,404 satisfied customers
There, I live in Bucharest, Romania. I own a 2005 CHRYSLER
Hi, there, I live in Bucharest, Romania. I own a 2005 CHRYSLER PT CRUISER TOURING 2.4, US manufactured with European Equipment, 4-DOOR HATCHBACK, VIN 1C8FYN8B45T545225. 1 month ago I had an accident. … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,942 satisfied customers
i changed plugs in my 08 pt cruiser non turbo 2.4 litre because
i changed plugs in my 08 pt cruiser non turbo 2.4 litre because of engine code p0303 now th light is back on and im thinking injectors or ignition coils what would you say?… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,500 satisfied customers
Chrysler PT Cruiser: where is the crankshaft position sensor
where is the crankshaft position sensor located on a 2007 pt cruiser? already replaced the cam sensor and still wont start. keeps bouncing back codes for both.… read more
Eric
Eric
Retired
N/A
37,404 satisfied customers
Chrysler pt cruzier: Hello I have an 04 pt cruiser with 2.4
Hello I have an 04 pt cruiser with 2.4 non turbo it started running bad coded p0300 random misfire changed plugs wires coil and plentum gasket it ran better but not right I opened intake hose and shot… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,942 satisfied customers
2004 PT Cruiser: key nothing happens..accessories..electric..engage
I have a 2004 PT Cruiser. When I turn the key nothing happens. The accessories come on and all the lights and electric features work but the key will not turn to engage the starter. Ive tried replacin… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,371 satisfied customers
PT CRUISER: CAR RUNS FINE..EVAP..SMOKE COMING..DOM1026
HELLO AGAIN I HAVE A2006 PT CRUISER 2.4 THE CAR RUNS FINE EXCEPT IT HAS 2 CODES FIRST IS PO456 SMALL LEAK IN EVAP AN P0113 INT SENSOR CIRCIT HIGH ANY SUGGESTION ON HOW TO REMEDY THIS PROBLEM I PUT A S… read more
garrtim
garrtim
service manager
1,116 satisfied customers
Error codes..non turboReplaced cam position senser still no starthave
hello my car just stopped running the error codes are 0441 0113 0522 0340 2003 non turbo Replaced cam position senser still no start have all electricall components working… read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
PT Cruiser: turbo..slight miss at idle..coil, spark jumped, shocked
05 PT Cruiser 2.4 turbo. Car was running with a slight miss at idle. #3 plug wire was removed at the coil, spark jumped, shocked mechanic, engine died. Tried to restart engine, all dash light come on,… read more
rpmdiag
rpmdiag
High school
8,954 satisfied customers
2004 pt cruiser: engine light..my garage..wont even turn..with turbo
got a 2004 pt cruiser with engine light on had codes and went to replace plugs ,wires and coil.before i got it in my garage it died and wont even turn over. got plenty of battery,lights ect. the engin… read more
petek26
petek26
Automotive Technician
Bachelor's Degree
156 satisfied customers
Too low..the code reader, I cleared code..car dies..Only works
My barometric pressure is reading too low on the code reader, I cleared code, but the problem remains, how do I fix it to make care run without engine light on. When I reset the computer car dies! Onl… read more
moparfl
moparfl
Vocational, Technical or Trade Scho
6,326 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

584 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

729 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

121 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

garrtim

garrtim

service manager

1,116 satisfied customers

20+ years chrysler certified

Amedee

Amedee

Chrysler Technician

1,081 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x