Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
I have a 2006 PT Cruiser VIN *****************. 52000 miles
I have a 2006 PT Cruiser VIN *****************. 52000 miles that set a DTC P0508 and had no power to go up hills. The IAC circuit had a 4000-4500 millivolt reading. The spec according to my DS898 was … read more
Julio Quispe
Julio Quispe
175 satisfied customers
2002 pt cruiser. Engine runs with cam sensor unplugged dies
2002 pt cruiser. Engine runs with cam sensor unplugged dies when plugged in. Replaced sensor with no changes … read more
Matt
Matt
Engineer
Bachelor's Degree
16,862 satisfied customers
I have no power at the coil pack. Consistent. 04 pt cruiser.
Yes. I put a new engine in it. The cam sencor broke so I replaced that and I replaced the crank sencor. But there is no power at the plug … read more
Amedee
Amedee
Chrysler Technician
Vocational, Technical or Trade Scho
1,081 satisfied customers
I have a 2005 pt cruiser 2.4 turbo code p0016 and p0344
I have a 2005 pt cruiser 2.4 turbo code p0016 and p0344 crank will sync on start up thats it. I have checked cam signal is normal for idle but crank sensor signal is reading for 2500 rpm im sure this … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
19,925 satisfied customers
It want start want fire put new crank sensor new cam sensor
it want start want fire put new crank sensor new cam sensor still no fire … read more
jc_davil
jc_davil
57 satisfied customers
Misfire and runs very rough no power. Consistent. 2003 pt
yes i tried new cam sensor,new plugs and wires and new coil … read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
12,068 satisfied customers
2009 pt cruiser. Cel flashing car shaking at idle no power
Cel flashing car shaking at idle no power accelerating. Changed plugs cam sensor and ignition coil not even a month ago Ran great … read more
Thomas Ragusa
Thomas Ragusa
Chrysler Certified Technician
174 satisfied customers
03 pt cruiser crank no start has fuel and spark. No start.
tried everything under the sun besides a new motor … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
9,427 satisfied customers
I have a PT cruiser 2008 bought it brand new never had any
I have a PT cruiser 2008 bought it brand new never had any issues in till now, it wont start, I replaced the starter ignition switch and both starter relays and still doing the same thing, battery is … read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
15,044 satisfied customers
Will the 03 pt cruiser target magnet work on 02 pt cruiser
Hi, cris will the 03 pt cruiser target magnet work on 02 pt cruiser and is there a difference.… read more
sprinkles08
sprinkles08
ASE Certified Technician
High School or GED
25,513 satisfied customers
Have a 07 with a 2.4 iput a new block in it now i dont have
have a 07 with a 2.4 iput a new long block in it now i dont have anyspark … read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,772 satisfied customers
Have po 300 & p2305 code on pt cruiser (2003) changed coil
have po 300 & p2305 code on pt cruiser (2003) changed coil pack, wires and spark plugs. Vehicle runs normal until a few miles and loses power. checked for spark using spark tester, and all coil packs … read more
sprinkles08
sprinkles08
ASE Certified Technician
High School or GED
25,513 satisfied customers
Working in customer car 2002 Chrysler or cruiser. Came in
Working in customer car 2002 Chrysler or cruiser. Came in with overheat issue, long story short,sold customer jasper engine due to old engine had blown head gasket. Remove and replace engine, installe… read more
Chris (aka - Moose)
Chris (aka - Moose)
Technician
Vocational, Technical or Trade School
729 satisfied customers
Chrysler PT Cruiser LE: 2003 PT Cruiser displayed engine light
2003 PT Cruiser displayed engine light on way home from airport after eleven-day vacation. Started a little rough in parking garage but ran well. I had to stop at an Auto Zone to read error codes. The… read more
Eric
Eric
Retired
N/A
37,709 satisfied customers
pt cruiser: fuses and relays..cyl..fuel pressure..62 checked injectors
02 pt cruiser wont start had misfire code 300 random 302, 303 have replaced cam sensor ignition coil and plugs and wires ,also replaced pcm checked all fuses and relays still wont start bought compres… read more
ND-TECH
ND-TECH
Chrysler/Jeep/Dodge specialist tech
Vocational, Technical or Trade Scho
1,410 satisfied customers
pt cruiser: cannot get new motor to fire, no fire to coil pack
replaced motor in 01 pt cruiser with motor out of another 01 pt cruiser, cannot get new motor to fire, no fire to coil pack, which we changed with running motor coil pack. Been told computer needs to … read more
ND-TECH
ND-TECH
Chrysler/Jeep/Dodge specialist tech
Vocational, Technical or Trade Scho
1,410 satisfied customers
PT cruiser: resistance..a different known good coil pack..same results
Same PT cruiser w/2.4 - I don't seem to be getting any fire from the coil pack, but the coil Primary and secondary resistance measurements are within specified range. I did try a different known good … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,466 satisfied customers
2001 pt cruiser: cam sensor, crank sensor, coil pack and spark plugs
i have a 2001 pt cruiser going down the hwy acted like an altinator started loosing lights radio etc... tried jumping the car then it would turn over but not start. got spark but its inconsistant spar… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,466 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

578 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

729 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

121 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

garrtim

garrtim

service manager

1,116 satisfied customers

20+ years chrysler certified

Amedee

Amedee

Chrysler Technician

1,081 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x