Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
I need an air conditioning compressor for a 2004 Chrysler
I need an air conditioning compressor for a 2004 Chrysler Sebring Lx Sedan … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,455 satisfied customers
I have a 2001 chrysler sebring sedan. The check engine light
I have a 2001 chrysler sebring sedan. The check engine light came on and the car vibrates and feels like it wants to stall. I got an error code p 1684. I replaced the battery now the engine light flas… read more
Edward Wright
Edward Wright
mechanical
164 satisfied customers
Throttle. 2008 chrysler sebring 2.4. Mechanic put in rcv
mechanic put in rcv thinking that would be the solution ...prob still occur … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
24,599 satisfied customers
Chrysler Sebring: 2005 chrysler sebring 2.4L DOHC P0340 and
2005 chrysler sebring 2.4L DOHC P0340 and P0325 codes. Quite intermittent. Clear codes and drive for about 30 - 40 minutes okay then Check engine light. Can't accelerate very well at all. Have to acce… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
12,097 satisfied customers
Chrysler Sebring JXi (Convertible): Recently I purchased a
Recently I purchased a 2002 Chrysler Sebring,Auto trans with a 2.7 V6 engine, Convertible from an individual. It has a funny problem. I think I know what is wrong, but before I spend time and money on… read more
Chris
Chris
16,503 satisfied customers
2004 Chrysler sebring: cyl..with a vin G..overhead cam
Is the 2004 Chrysler sebring 4 Cyl 2.4 L with a VIN "G" at the 8th position, a single or a double overhead cam ?… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
697 satisfied customers
Chrysler Sebring Sedan: 2005 Chrysler Sebring 2.4L 16 valve
2005 Chrysler Sebring 2.4L 16 valve DOHC won't start. Reads a code of P0340 (Cam Position Sensor A Bank 1 CKT Malfunction). If I just changed the sensor, should it run again? Died on me while I was dr… read more
Amedee
Amedee
Chrysler Technician
Vocational, Technical or Trade Scho
1,081 satisfied customers
99 Chrysler Sebring: starts right..block it stalls out on me..slow
I have a 99 Chrysler Sebring that has been acting up lately. The problem is after starting the car , which starts right up, within driving a block it stalls out on me and is scary for slow to stop. An… read more
snapontech
snapontech
Associate Degree
195 satisfied customers
2002 Chrysler Sebring Limited: Engine quiet and good acceleration.
Bought a 2002 Chrysler Sebring Limited convertable in Mid-May 2011. Ran like a dream. Engine quiet and good acceleration. Had the car almost 2 months when it bucked and stopped. Neither check engine n… read more
Don Knight
Don Knight
Shop Manager/Technican
Associate Degree
1,695 satisfied customers
chrysler sebring: engine oil filter located..sedan..2.4L
where is the engine oil filter located on a chrysler sebring sedan year 2005 engine 2.4L DOHC. I can not see the filter. Do I need to remove any item in order to gain access to this filter? Thanks.… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2004 chrysler sebring lx: The problem is : It bogs
2004 chrysler sebring lx with 2.4 liter dohc . The problem is : It bogs down under hard acceleration and check engine light comes on. Will clear up once up to speed and light will go off. Engine appea… read more
moparfl
moparfl
Vocational, Technical or Trade Scho
6,326 satisfied customers
have a 2000 Chrysler Cirrus 2.4 DOHC 4cyl timing belt broke
have a 2000 Chrysler Cirrus 2.4 DOHC 4cyl timing belt broke at highway speed. Paid a jackleg to replace now it starts but runs rough, sounds like running on 3 cylinders would valves or pistons be dama… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
697 satisfied customers
Chrysler Sebring Gas Pedal Makes A Clicking Noise.
After changing the 1997 Chrysler Sebring's LXI 2.5 6cyl throttle cable, it will run but shuts off on acceleration. The lights and heat gauge act weird when I press the gas pedal. I hear a clicking sou… read more
Amedee
Amedee
Chrysler Technician
Vocational, Technical or Trade Scho
1,081 satisfied customers
2005 Chrysler Sebring: Running fine..Changed timing belt on 2.4L DOHC.
2005 Chrysler Sebring 97000 miles. Running fine. Changed timing belt on 2.4L DOHC. Started right away but running rough. Took for a drive and acted like a limiter at 2500 rpm, but could slowly get up … read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
chrysler: accelerate check engine light comes..map sensor
2005 pt crusier getting 2 codes 1697 and also 2074 already looked up both If i hit gas to accelerate check engine light comes on and car hesitates took to Firestone and they say it is the computer don… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
12,097 satisfied customers
2004 chrysler sebring: sputters..check engine light comes on..misfire
I have 2004 Chrystler Sebring 4 cyl. Every so often it spits and sputters and the check engine light comes on. I had a diagnostic test done, and it read cyl. 3 misfire. we changed the coil, all the pl… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,506 satisfied customers
i make a turn the steering wheel gets stiff and the car turns
my car is making explosion sounds when i press the gas it seems like the gas doesnt pass and when i make a turn the steering wheel gets stiff and the car turns off… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
Chrysler sebring: 2.4L..1000 to 2000 RPM when in PARK..throttle body
I have a chrysler sebring 2004 2.4L DOHC. Problem is the idle is high, bouncing up and down, between 1000 to 2000 RPM when in PARK, however in DRIVE, the RPM is over 2000. This started when I cleaned … read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
12,097 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

587 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

729 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

121 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

garrtim

garrtim

service manager

1,116 satisfied customers

20+ years chrysler certified

Amedee

Amedee

Chrysler Technician

1,081 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

697 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x