Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Got tuneup done 07 pacifica code was misfire 4 still giving…

Customer Question
Got tuneup done 07...

Got tuneup done 07 pacifica code was misfire 4 still giving code and post catalyst fuel trim too lean bank 4 what's that

Mechanic's Assistant: Have you seen the misfire code before? Has the car been stalling?

Nope

Mechanic's Assistant: Are you fixing your Pacifica yourself? What have you tried so far?

Spark plugs, sea foam to clean out engine

Mechanic's Assistant: Anything else you want the mechanic to know before I connect you?

Had a trans fluid pressure code to it reads sometimes and sometimes it dont

Submitted: 4 months ago.Category: Chrysler
Show More
Show Less
Ask Your Own Chrysler Question
Answered in 3 minutes by:
3/15/2018
Chrysler Mechanic: tech0405, Technician replied 4 months ago
tech0405
tech0405, Technician
Category: Chrysler
Satisfied Customers: 11,156
Experience: Certified technican 14 years experience
Verified
Good morning has the coil been checked ?
Ask Your Own Chrysler Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a chrysler mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Don - Mo Lurch Your Own Question
Don - Mo Lurch
Don - Mo Lurch
Don - Mo Lurch, Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 542
542 Satisfied Customers
Experience: Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Don - Mo Lurch is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

542 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

568 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

419 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Related Chrysler Questions
I recently had the transmission fluid changed and got it
I recently had the transmission fluid changed and got it back took it for a drive the next day and it was fine until i turned it off then back on.. as i started to drive off at low speeds it died out … read more
Chris (aka - Moose)
Chris (aka - Moose)
Technician
Vocational, Technical or Trade School
568 satisfied customers
After replacing the upstream o2 sensor it went a month
After replacing the upstream o2 sensor it went a month without the check engine light on, but now it's back on with p0131 code and the car is running ruff … read more
Expert
Expert
30 satisfied customers
I have a 2007 Chrysler Pacifica 4.0 2wd and the check engine
I have a 2007 Chrysler Pacifica 4.0 2wd and the check engine light is on and the codes were for the egr valve and a cylinder 5 misfire. The auto parts store said to change the plugs for the misfire wh… read more
Gunvir Singh
Gunvir Singh
1,949 satisfied customers
I have a 2004 Pacifica 2WD, 67,000 miles. From a stop when
Hi I have a 2004 Pacifica 2WD, 67,000 miles. From a stop when accelerating it jerks, it is worse when on an incline. If I accelerate slow it doesn't do it. I replaced the TPS with no change, Trans fil… read more
Brandon
Brandon
93 satisfied customers
What causes a 058 code on a 4 liter engine in 2007 Pacific,
what causes a 058 code on a 4 liter engine in 2007 Pacific … read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
25 satisfied customers
I hAVE BEEN HAVING A PROBLEM WITH MY 2006 CHRYSLER PACIFICA.
I hAVE BEEN HAVING A PROBLEM WITH MY 2006 CHRYSLER PACIFICA. WHEN I PUT THE VEHICLE IN DRIVE, IT LABOURS TO MOVE FORWARD, BUT AFTER REVVING THE ENGINE FOR A FEW SECONDS, THE VEHICLE JOLTS AND THEN MOV… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
5,684 satisfied customers
I have a customer with a 2008 dodge avenger 3.5, that is
I have a customer with a 2008 dodge avenger 3.5, that is having a misfire issue. The engine has 208k on it so I may be beating a dead horse, but the car itself is in very good condition. So, far I sca… read more
Joshua Haynes
Joshua Haynes
Associate
273 satisfied customers
Had the van in running w/P0300 code posted. Dealer replaced
Had the van in for poor running w/P0300 code posted. Dealer replaced plugs which seem to clear up the issue. 2 days later P2096 codes are being posted. … read more
Brad
Brad
Technician at Dodge Dealership
Vocational, Technical or Trade Scho
12 satisfied customers
Chrysler Pacifica Limited: . I was looking on Long Term
Hi. I was looking on Long Term Fuel Trim on bank 1 and bank 2 on engine Idle. Car: Chrysler Pacifica AWD 4.0 The values on idle are: Bank 1 - 24 Bank 2 -18 Are this values are correct? When im driving… read more
CHRIS ZAPANTIS
CHRIS ZAPANTIS
AUTO TECHNICIAN
157 satisfied customers
Chrysler Pacifica: I have a 2007 Pacifica FWD 4.0L. I bought
I have a 2007 Pacifica FWD 4.0L. I bought this car 4 years ago with 33000 miles. It has had a stalling problem from day 1. However it would go several months without an issue. The is now getting worse… read more
Chris (aka - Moose)
Chris (aka - Moose)
Technician
Vocational, Technical or Trade School
568 satisfied customers
Chrysler Sebring: what to do, 2005 chrysler sebring? replaced
what to do, 2005 chrysler sebring? replaced air idle valve, spark plugs, wires, ignition coil, pcv valve, changed to high octane fuel, added sea foam, checked vacume lines, spark is speratic from boot… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
696 satisfied customers
Chrysler LHS: I have a 1999 Chrysler LHS 3.5L I some trouble
I have a 1999 Chrysler LHS 3.5L I some trouble codes,po137,bank one sensor 2 shorted to ground,po137 oxygen sensor circuit low voltage bank 1 sensor 2,po171b bank1 system too lean,po175 bank2 system t… read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
Ive installed two new upstream O2 sensors in my 05 Chrysler
I've installed two new upstream O2 sensors in my 05 Chrysler Pacifica, first an after market Bosch and now a Densa from the dealer. Still throwing a P0131 ODBII code on a regular basis. Sometimes acco… read more
DODGEEXPERT
DODGEEXPERT
SERVICE MANAGER
Associate Degree
546 satisfied customers
2004 chrysler 300m: 3.5L HO engine 110k mi.I changed plugs..rich rt
I have 2004 chrysler 300m 3.5L HO engine 110k mi. I changed plugs recently (2nd time). After changing I'm getting P0172 (rich rt bank). Never got this before. After erasing, it will run a little while… read more
Dodgerench
Dodgerench
Driveability Tech
Vocational, Technical or Trade Scho
409 satisfied customers
2002 Chrysler Concorde: VIN..under load..all three cylinders..coils
2002 Chrysler Concorde 3.5L VIN M. Engine runs fine at idle and accelerates fine off idle. At cruising speed under load misfires on right bank all three cylinders, #2, 4 and 6. Plugs checked OK, coils… read more
Dodgerench
Dodgerench
Driveability Tech
Vocational, Technical or Trade Scho
409 satisfied customers
I HAVE A 1993 PLY..WHEEL DRIVE..000 RPM..CODE READS
I HAVE A 1993 PLY. VOIGER ALL WHEEL DRIVE, IT WILL NOT GET OVER 2,000 RPM THE CODE READS 43 AND 55 IT DOES NOT TELL ME WHAT I AN LOOKING FOR.MABY YOU NO WHAT IS CAUSING IT. CLYDE… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
7,847 satisfied customers
2005 sebring: engine cuts..starts missing..it shuts off..35 runs fine
2005 sebring engine cuts out at 50 - 60 and starts missing to the point it shuts off. let sit for a few min and it will start again... If i keep it below 35 runs fine. Fuel filter?pump? sensors? The c… read more
Matt Hardy
Matt Hardy
Master Auto Repair Technician
Associate Degree
605 satisfied customers
98 grand voyager se: bit then wont shift out of low gear pulls..sits
i have a 98 grand voyager se shifts fine for a bit then wont shift out of low gear pulls strong after it sits it will shift is it the solienod… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x