Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
I have a 1999 Sebring Convertible. I bought a replacement
I have a 1999 Sebring Convertible. I bought a replacement motor from a wreck 1999 Sebring thinking it would be compatible. After pulling the motors I see they are the same on the bottom and parts are … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,153 satisfied customers
Chrysler Sebring Limited: I am replacing the oil pump in a
I am replacing the oil pump in a 2004 Chrysler Sebring convertible 2.7L engine. The crankshaft sprocket was aligned with the fuel pump alignment mark and when we reassembled the cam sprockets with the… read more
Chris
Chris
289 satisfied customers
Chrysler dodge: Hello i have a 02intrepid with a 2.7l engine
Hello i have a 02intrepid with a 2.7l engine i bought a Haynes manual an have done everything the book specified the cams are 90degrees from the valve cover mating surface. But the confusion starts wh… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,263 satisfied customers
Chrysler Sebring Limited: I have 2005 Chrysler Sebring Convertible.The
I have 2005 Chrysler Sebring Convertible. The car has always run good until recently when it kept overheating. I'd fill up the coolant and couple of days later it would overheat again. We've replaced … read more
Josh
Josh
Lead Technician
High School or GED
1,570 satisfied customers
2000 sebring: convertible..2.5 v6..timing belt, both cams
I have a 2000 sebring jxi convertible (2.5 v6). When I removed the timing belt, both cams suddenly moved. They are both out by about an inch. (I did mark the cam pulleys with the block). when I try to… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,153 satisfied customers
Chrysler Sebring: timing marks..main timing chain at 12:00..sprocket
I have a 2.7 Chrysler Sebring 2.7. I am having trouble getting the marks on the the 2 timing sprokets to line up. I know where all the timing marks are located and when I move the main timing chain at… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
14,755 satisfied customers
Chrysler sebring: the timing belt and water pump..camshaft..exhaust
I was replacing the timing belt and water pump on a 2.4L chrysler sebring when I got puzzled by the position of the camshaft timing marks after I tried to reinstall the camshaft sprockets. It doesn't … read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,724 satisfied customers
Chrysler LHS how do you retime 3.5 chrysler lhs when replacing
how do you retime 3.5 chrysler lhs when replacing timimg belt if crank shaft moved timing don't line up… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,153 satisfied customers
2002 chrysler 300: the water pump and timing belt..block..wont start
i replaced the water pump and timing belt on a 2002 chrysler 300 m. Before i put the timing belt on i lined up the keyways on the pullies to the marks shown on the block. the vehicle wont start , is t… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,153 satisfied customers
A water pump and need some help on taking of the timing blet cover
On a 2002 serbing I'm trying to replace a water pump and need some help on taking of the timing blet cover can you help me bob… read more
Eric
Eric
Retired
N/A
33,956 satisfied customers
Chrysler sebring: convertible..v6..vin..water pump installed no start
chysler sebring 2002 lxi convertible v6 2.7l vin r.....no ignition no injector pulse ever since water pump installed no start. if timing chain and cam chains are off or out of sync will this happen?… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
2004 pt cruiser: timing belt..timing marks..cam sprockets..alignment
I am replacing a broken timing belt how should I line up the timing marks and can I turn cam sprockets clockwise to the correct alignment it is a 2004 pt cruiser 2.4L non-turbo… read more
Ron Z.
Ron Z.
Vocational, Technical or Trade Scho
20,216 satisfied customers
Sebring: timing chain..the bent valves, got the heads machined..cams
I am replacing my main timing chain on my sebring 2004. I replaced the bent valves, got the heads machined, installed all new timing components and now am replacing the chains. Here is my question and… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
11,560 satisfied customers
I have a 2002 Dodge Intrepid with a 2.7 liter engine. I had
I have a 2002 Dodge Intrepid with a 2.7 liter engine. I had a water pump failure; I replaced it, the timing chain, guides, and tensioner. The timing chain marks are aligned properly (60 deg after TDC,… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,153 satisfied customers
2001 sebring: water pump..aligning cam sprocket bolts with cam hub
2001 sebring did a water pump change out, had issue with aligning cam sprocket bolts with cam hub. got motor back together, attempted to rotate engine by hand,engine bound up within an 1/8 of a turn.a… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
14,755 satisfied customers
2001 chrysler sebring: timing chain..2.7L..tensioner..cam
hi im doing a timing chain on a 2001 chrysler sebring 2.7L and i set the timing, replaced the tensioner. etc now im trying to replace the camshaft sprocket bolts and the book says rotate the camshaft … read more
quickcar
quickcar
High School or GED
1,688 satisfied customers
97 chrysler sebring: removing..timing belt..alignment..crankshaft
working on 97 chrysler sebring 2.5 l v 6. While removing the timing belt the posterior cam sprocket rotated counter clockwise about 30 degrees. The posterior cam sprocket is now about 30 degrees out o… read more
supertech
supertech
Vocational, Technical or Trade Scho
2,235 satisfied customers
Sebring: 2.7L v6..timing chain..crankshaft mark is lined..cam
I am working on my sons 01 Sebring Lxi 2.7L v6. It turned out to be the front bearing or seal on the water pump was out. I replaced the water pump and since it had 80,000ml on it I put a new timing ch… read more
Roadside Jerry
Roadside Jerry
Auto Expert on Just Answer
Vocational, Technical or Trade Scho
2,945 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

545 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

568 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

419 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x