Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Chrysler Questions
My 2006 Chrysler Town and Country when shifting from 3rd to
My 2006 Chrysler Town and Country when shifting from 3rd to 4th rpms rise then shifts hard into 4th could this be the shift solenoid? … read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
It doesn't seem to want to shift, and the RPM's go really
It doesn't seem to want to shift, and the RPM's go really high even trying to get to just 30 mph the RPM's will go up to 3and a half. Some days it works okay for about a mile or two then it just doesn… read more
Mrchippeway
Mrchippeway
chrysler mechanic
Vocational, Technical or Trade School
129 satisfied customers
I get P0734 and P0792 codes, usually lighting the Check
I get P0734 and P0792 codes, usually lighting the Check Engine warning. Problem started immediately after having a discharged battery due to side door open all night. Problem causes an upshift failure… read more
john -aka eauto
john -aka eauto
The Car Guy
17,644 satisfied customers
2008 Chrysler town and country. engine won't turn over.
2008 Chrysler town and country. engine won't turn over. lights show up on gear shift but transmission won't engage … read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
The pin came out of the gear shift, Its a 2008? Town and
Removed the gear shift handle, trying to put the pin back in that fell out … read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
Sebring Convertible Limited 2.7 liter: Just replaced PCM
Sebring Convertible Limited 2.7 liter: Just replaced PCM (main computer). Check engine light goes on: Codes P0734 and P1790. Engine revs up momentarily higher intermittently in (or when shifting into)… read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
I have a 2009 Chrysler Town & Country Limited minivan and it
hello there. I have a 2009 Chrysler Town & Country Limited minivan and it set p-codes for gear ratio errors for 1st, 3rd, and 4th gears. So I assume the dealer is correct in that I needed a new (mopar… read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
Chrysler PT Cruiser: I have a PT Cruiser 2001 5-speed. I just
I have a PT Cruiser 2001 5-speed. I just replaced 4 bushings (Booger, the two bushing under hood attached to linkage and the two under the shifting console...there were none in shifter console, and th… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
879 satisfied customers
2008 chrysler: dealership..ran fine..all the gears..trans
had transmission serviced at dealership has 120000 my 2008 chrysler town and country limited, ran fine for @300 miles then went into limp mode, shift solenoid and pressure code came up, if I turn it o… read more
Kevin
Kevin
Owner Kevins Mobile repair
Associate Degree
91 satisfied customers
chrysler: it wont shift..around 40 mph..faster..three trouble codes
i have a chrysler town country 98. It won't shift into 3rd or fourth gear. in shifts fine but when i get up around 40 mph the rpm goes up and it won't go any faster. three trouble codes appear. po733 … read more
Mopar_Certified
Mopar_Certified
Vocational, Technical or Trade Scho
5 satisfied customers
2001 Chrysler: 3.3 liter on the way home it stop shifting..smell
i have a 2001 Chrysler town and country mini van 3.3 liter on the way home it stop shifting. it is full of fluid and the fluid is not dirty or black no burn smell… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
chrysler: pulling..warning..tranmission control by electronic module
2000 town and country chrysler stop pulling with no warning is the tranmission control by electronic module or could it be the tranmission.… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2000 Town & Country: 000 miles..higher speeds..gas pedal..drives fine
Hi. Year 2000 Town & Country, 191,000 miles, transmission service done 1 month ago at Chrysler dealer: The problem: Recently (the last 3-4 months), at higher speeds or quick punching down of the gas p… read more
stin1974
stin1974
Mechanic/Technician
High School or GED
42 satisfied customers
2001 chrysler town & Country: a rebuilt trans..shifting..pcm
I just installed a rebuilt trans in a 2001 Chysler Town & Country mini van 3.8 awd and its not shifting right in third and fourth the codes were 700 733 734A I replaced both speed sensors after this h… read more
John
John
Vocational, Technical or Trade Scho
1,209 satisfied customers
2004 Chrysler Pacifica: gas pedal..few seconds, engine rpm slow down
My 2004 Chrysler Pacifica (80K miles) delays engagement between various transmission gears. This usually happens from a high gear (3rd or 4th) once you release the gas pedal. It then stays in the high… read more
ricardo hohl
ricardo hohl
automotive instructor
Associate Degree
1,818 satisfied customers
2003 Chrysler: trans fluid..3rd to 2nd) at 30 miles per hour..minivan
immediately after changing the trans fluid and filter there is a definate jolt when dropping down from (like 3rd to 2nd) at 30 miles per hour. This is a 2003 Chrysler town and country minivan with 970… read more
Tom
Tom
Associate Professor, Auto Technology
Bachelor's Degree
353 satisfied customers
voyager: V6..wheels balanced and alligned, new cv shafts..struts
Our 1997 plymouth votager 3.0 L ,V6 has a vibration(shudder) when it is accelerating. It shudders from one to about five seconds only occasionally while accelerating and it can occur from about 40 mph… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
696 satisfied customers
1994 Chrysler LHS: 4th gear..neutral - until I was..put back..3rd gear
My 1994 Chrysler LHS just developed a transmission problem. While driving close to midnight the transmission slipped out of 4th gear - engine raced as in neutral - until I was able to put back into dr… read more
John
John
Vocational, Technical or Trade Scho
1,209 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

542 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

568 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

419 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x