Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Chrysler Questions
I'm an Italian guy, so excuse my bad english. I'm desperate
I'm an Italian guy , so excuse my bad english. I'm desperate .... I own a 2013 ram 1500 4wd with the 3.6 pentastar. I buyed this truck 1 year ago and immediately the mil illuminates with the P06dd cod… read more
Vladimir Grodskiy
Vladimir Grodskiy
Automotive Electrician
Vocational, Technical or Trade Scho
2,724 satisfied customers
Im looking for the camshaft position sensor to fix a P0018
im looking for the camshaft position sensor to fix a P0018 error code … read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,263 satisfied customers
I have a ticking noise even after i had all the rocker arms
I have a ticking noise even after i had all the rocker arms replaced … read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,263 satisfied customers
Town and country with p000a and p0017 codes. Replaced cam
Town and country with p000a and p0017 codes. Replaced cam sensors, crankshaft sensor Ann's speak plugs, also oil change. Any more suggestions? … read more
Tool Hut
Tool Hut
Owner
519 satisfied customers
Chrysler Sebring: I have a crysler 2010 Sebring once I reach
I have a crysler 2010 Sebring once I reach 50 miles an hour it dont go no faster the rpm stays at four doesn't go faster dont have no clue… read more
Lou P. master tech
Lou P. master tech
Mercedes Benz master tech
Bachelor's Degree
6,544 satisfied customers
Chrysler Grand Voyager SE: 2005 grand voyger code;p0016.have
2005 grand voyger code;p0016.have renewed timing chain kit with correct cam sprocket and new crank and cam sensors but still comes up when warm.… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,263 satisfied customers
Chrysler 300M: RE: 2000 Chrysler 300M, 3.5 HO V6. We just
RE: 2000 Chrysler 300M, 3.5 HO V6. We just did a short block exchange. Cleaned everything thoroughly, back together. Started an ran for a couple of minutes. Sounds like the valve Tappets are not getti… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
14,751 satisfied customers
300 chrysler: lifter..front of eng..it .It is a 3.5 v6 24 valve..pumps
I have a 300 chrysler it seems too have a lifter noise in the front of eng it has 103.000 miles on it .It is a 3.5 v6 24 valve . I have herd from a guy that the oil pumps tend too go out about 110,000… read more
Repair1014U
Repair1014U
Recently Retired
Vocational, Technical or Trade Scho
706 satisfied customers
1996 Chrysler: valve covers..rotated..adjuster..one exhaust that
I'm working on my 1996 Chrysler LHS. I have a tappet noise so I've removed the valve covers and rotated the motor and checked the lash at each adjuster. I have one exhaust that is completely killed. S… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
4,980 satisfied customers
1994 chrysler concord: engine area..lifter..head gaskets..yu high rev
i have a 1994 chrysler concord 3.3 engine,it as a like a loose rocker arm noise from motor down center of engine area,i replaced lifter a head gaskets and cleaned push rods noise at times after yu hig… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
4,980 satisfied customers
Chrysler pacifica: starting and slight ticking after warm up
what is most likly cause a 05 chysler pacifica 3.5 to make aticking noise on starting and slight ticking after warm up… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,148 satisfied customers
Chrysler Pacifica: L..V6..it; oil and filter have been changed..3K
I own a ‘07 Chrysler Pacifica with a 4.0 L V6. It has 59K miles on it; oil and filter have been changed consistently at 3K intervals. I have been using 10W-30 oil as specified. Within the last few mon… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,148 satisfied customers
2006 Pacifica: 77,000 miles...2000 miles..that was louder than normal
I have a 2006 Pacifica with a 3.5 L engine. It has 77,000 miles. Approximately 2000 miles ago I became aware of an engine "tick" that was louder than normal. It appears to be coming from the top porti… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,148 satisfied customers
chrysler: one stop the tappet rattle..tappets are loud
How does one stop the tappet rattle in a "Chrysler 300M" engine. Had berings replaced and now the tappets are loud.… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
696 satisfied customers
pinpoint..problem, I have the valve cover..rocker arms..clicking sound
This is my thrid time trying to pinpoint the problem, I have the valve cover off now and find the only movement with the rocker arms is one has movemnt from side to side would this cause the clicking … read more
cartech
cartech
master tech
High School or GED
3,324 satisfied customers
2000 Chrysler Concorde: overheated..I cranked it..cylinder
I have a 2000 Chrysler Concorde with the 3.2L. A few weeks ago, it started running like crap and overheated. After I cranked it back up, there was a knocking sound coming from the top side of the righ… read more
moparfl
moparfl
Vocational, Technical or Trade Scho
6,326 satisfied customers
Re; 2006 Chrysler Pacifica - just replaced #4 exhaust rocker
Re; 2006 Chrysler Pacifica - just replaced #4 exhaust rocker arm assy because upon inspection, the valve lash adjuster showed to be weak. After replacement, allowed engine to reach operating temperatu… read more
Stonyman
Stonyman
automotive technician
High School or GED
723 satisfied customers
3.8: vans..a knock which sounds like a rocker arm knock
I have 3 mini vans. My 1996 with a 3.8 engine has developed a knock which sounds like a rocker arm knock. It seems to be coming from the rear rocker cover. You barely hear it at idle and it increases … read more
garrtim
garrtim
SERVICE MANAGER
2,266 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

545 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

568 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

419 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x