Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Chrysler Questions
No spark out of coil 2&3. 2005 Chrysler PT Cruier 2.4 turbo.
Wire going to coil: gree/blue = 12 v, green/gray = 0 … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,074 satisfied customers
It want start want fire put new crank sensor new cam sensor
it want start want fire put new crank sensor new cam sensor still no fire … read more
jc_davil
jc_davil
57 satisfied customers
2003 pt cruiser died while driving I changed the crank and
2003 pt cruiser died while driving I changed the crank and cam sensor and coil pack I have voltage to the coil but no spark … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
6,498 satisfied customers
Its a one. Are you ready? 2006 PT cruiser 2.4 non turbo,
Customer brought me this cruiser, suspected blown head gasket. Removed head, had head milled, replace head gasket, timing belt and water pump and spark plugs. Didnt want to start up. Finally got started but wont stay running. Cleaned IAC, Replaced cam and crank sensor also map sensor. No codes. Sometimes will start up relatively easily and others not at all. Usually have to feather the accelerator to start. Test drive and sometimes stalls at a stop and difficult to restart. … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,320 satisfied customers
Regarding the cam timing on the pt cruiser is the a right
Regarding the cam timing on the pt cruiser is the a right and a wrong way when installing both cam gears back on .. One side of the gear says 2.0 front and the other 2.4 front… read more
HDGENE
HDGENE
6,607 satisfied customers
Chrysler PT Cruiser GT: i have 2003 pt cruiser 2.4 turbo changed
i have 2003 pt cruiser 2.4 turbo changed head what a job got it put back together no spark at plugs was running when taken apart ive replaced coil pack still no fire… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,211 satisfied customers
We have a 2005 PT Cruiser turbo and my wife was at a stop
We have a 2005 PT Cruiser turbo and my wife was at a stop light and her car just went dead. Check engine light and oil light came on. We are being told the timing belt is stipped. Are these engines in… read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
419 satisfied customers
I have a 2003 pt cruiser 2.4l turbo. My problem is no fire
i have a 2003 pt cruiser 2.4l turbo. My problem is no fire on any of the plugs. I have 12 volts on the pin 2 wire on the wiring connector. I also am getting a constant signal on pins1 and 3 with no ke… read more
Ryan-CTech
Ryan-CTech
Manager
140 satisfied customers
chrysler pt cruiser: HAVE A 06 PT CRUISER THAT WANT REV UP.
HAVE A 06 PT CRUISER THAT WANT REV UP. IT STARTSand runs smooth until it hits 2500 rpm. PUT CAM SHAFT SENSOR AND CRANK SENSOR ON IT BUT STILL SHOWS NEEDING A CAM SENSOR. SET TIMING AND NEW INTAKE GASK… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,074 satisfied customers
Chrysler Sebring JX (Convertible): Hi. i have a 2004 Chrysler
Hi. i have a 2004 Chrysler Sebring convertible. the problem I'm having is that it will not stay running. It will turn over but will not catch. I've had 1 spark plug changed and alson a new coil pack. … read more
sprinkles08
sprinkles08
Technician
High School or GED
18,074 satisfied customers
Chrysler PT Cruiser Touring: I have a 04 PT Cruiser with 2.4L
I have a 04 PT Cruiser with 2.4L non turbo it is giving a 0340 code. I have replaced the cam position sensor and the car still will not start. Just a little history on the car it has a new battery, co… read more
MoparHeat
MoparHeat
Automotive Technician
ASE Automotive Technician
988 satisfied customers
Chrysler PT Cruiser GT Turbo: 2003 chrysler PT cruiser GT TURBO
2003 chrysler PT cruiser GT TURBO 2.4 Had a engine code of PO340. Replaced Cam Positioning Sensor. Before replacing sensor engine would not start !!! Replaced sensor ran fine; cut off and let it cool … read more
Amedee
Amedee
Chrysler Technician
Vocational, Technical or Trade Scho
956 satisfied customers
2003 pt cruiser: Idles rough. new coil pack, ngk plugs..cam sensor
2003 pt cruiser 2.4 engine standard transmission. Idles rough. new coil pack, NGK plugs, wires cam sensor. keeps coming up with po300 multiple misfire code. once cam up with po344 code cmp signal inco… read more
Matt Hardy
Matt Hardy
Master Auto Repair Technician
Associate Degree
919 satisfied customers
2005 pt cruiser turbo: convertable..cam sen,the coil..crank sensor
have a 2005 pt crusier turbo 2.4 convertable that i cant get to fire have changed the cam sen,the coil .and the crank sensor and the car is still not getting spark please help… read more
garrtim
garrtim
SERVICE MANAGER
2,266 satisfied customers
2001 pt cruiser: cam sensor, crank sensor, coil pack and spark plugs
i have a 2001 pt cruiser going down the hwy acted like an altinator started loosing lights radio etc... tried jumping the car then it would turn over but not start. got spark but its inconsistant spar… read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,320 satisfied customers
1999 chrysler cirrus: dohc..shuts..car only quits when moving..restart
I have a 1999 chrysler cirrus with a 2.4 dohc 16 valve engine that shuts off at 2000 rpm in drive. This car only quits when moving. It has to be put in park not "n" and cycle the key to restart. Fuel … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,320 satisfied customers
2003 PT CRUISER: FUEL RAIL..COIL PACK, SPARK PLUGS..SPARK PLUG WIRES
2003 PT CRUISER, I HAVE FUEL, APPROX 58PSI ON THE FUEL RAIL WHILE TRYING TO CRANK. BUT GOT NO SPARK. THE COIL PACK, SPARK PLUGS, AND SPARK PLUG WIRES WERE REPLACED ABOUT 6 MONTHS AGO AT DEALERSHIP. CA… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
11,548 satisfied customers
2004 2.4: Check engine light came..accelerating..my mechanic
Re 2004 2.4 turbo. Check engine light came on intermittently, and car started bucking and missing "under power" - as in while accelerating. Runs fine if the light is not on, or even if the light is on… read more
Marc
Marc
fleet supervisor
Vocational, Technical or Trade Scho
1,140 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

556 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

54,738 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

419 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x