How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 522
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

03 pt cruiser crank no start has fuel and spark, no start,

Customer Question

03 pt cruiser crank no start has fuel and spark
JA: Has the vehicle turned into a gas hog? And how does it start -- same as usual?
Customer: no start
JA: Are you fixing your PT Cruiser yourself? What have you tried so far?
Customer: tried everything under the sun besides a new motor
JA: Anything else you want the mechanic to know before I connect you?
Customer: nope
Submitted: 1 month ago.
Category: Chrysler
Expert:  david craig replied 1 month ago.

Hi Im David, thanks for visiting the site. What is your fuel pressure?

Customer: replied 1 month ago.
58-60
Customer: replied 1 month ago.
Has good fuel good spark and good compression
Customer: replied 1 month ago.
It's throwing a code for the asd system I replaced the fuses and relay with new and still no start
Expert:  david craig replied 1 month ago.

whats the code

Customer: replied 1 month ago.
P-0688 and p-0685
Expert:  david craig replied 1 month ago.

ok, standby

Expert:  david craig replied 1 month ago.

2.4?

Customer: replied 1 month ago.
2.4
Expert:  david craig replied 1 month ago.

ok

Expert:  david craig replied 1 month ago.

ok, both tests are basically the same. If you dont have a DRB3, just do the steps that its not needed.

Customer: replied 1 month ago.
I have done both of those procedures and have had no luck in the end
Expert:  david craig replied 1 month ago.

ok, then the pcm is the issue

Expert:  david craig replied 1 month ago.

have you done a continuity test of the wiring?

Customer: replied 1 month ago.
did full continuity test everything is good with that new fuses and relays new battery new crank and cam sensors
Expert:  david craig replied 1 month ago.

ok, if you did a continuity test and followed the diagnostics that I sent, then the ONLY thing it can be is the PCM.

Expert:  david craig replied 1 month ago.

hows it going?