How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Chrysler
Satisfied Customers: 24574
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
17871496
Type Your Chrysler Question Here...
Dan is online now
A new question is answered every 9 seconds

I just bought a 2003 Sebring that had been setting for a

This answer was rated:

I just bought a 2003 Sebring that had been setting for a year I put a new battery changed the starter fuse it started but my signal lights and wipers and radio are not working
JA: Have you changed a battery before?
Customer: No I just got the car today
JA: Are you fixing your Sebring yourself? What have you tried so far?
Customer: yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: No

Hello, my name is ***** ***** I'm here to help get your problem solved.

Do the wipers work when you put switch in wash position?

Customer: replied 1 month ago.
Not sure didn't try that

Try it and let me know, thanks.

Customer: replied 1 month ago.
The wipers do not work in the wash position

Check to see if the 10 amp fuse in location 15 of interior fuse box is blown, if not check to see if it has voltage with key on. Let me know, thanks.

Customer: replied 1 month ago.
No power to that fuse

Check to see if fuse 17 has voltage with key on, let me know. Thanks.

Customer: replied 1 month ago.
it does

This most likely means your ignition switch has failed then. At ignition switch check to see if black/white wire has power with key on, if not then ignition switch needs to be replaced. Let me know if you have questions, thanks.

Customer: replied 1 month ago.
If the switch is bad would the car start?

Yes it has multiple circuits that goes through the switch, so just the 1 circuit that powers fuse 15 has failed. Let me know if you have questions, thanks.

Customer: replied 1 month ago.
Do you have a part number

The part number is(###) ###-#### Let me know how it goes or if you run into questions, you can reply to this answer at any time without additional fees. Please do not forget to rate answer, thanks.

Dan and 6 other Chrysler Specialists are ready to help you