How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 23130
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My trunk wont ooen on my 2006 pt cruiser, Key hole is

Customer Question

My trunk wont ooen on my 2006 pt cruiser
JA: Have you tried silicone spray or WD-40?
Customer: Key hole is damaged and eletric lock is not working to unlock
JA: Are you fixing your PT Cruiser yourself? What have you tried so far?
Customer: I have tried keyless entry and key hole but its damaged
JA: Anything else you want the mechanic to know before I connect you?
Customer: Nope
Submitted: 2 months ago.
Category: Chrysler
Customer: replied 2 months ago.
My trunk lid refuses to open..the key lock is broken and the keyless or door lock is not engaging please help asap
Expert:  sprinkles08 replied 2 months ago.

Hello and welcome to JustAnswer!

If the lock cylinder stopped working before the electric release stopped then you most likely have more than one issue. You may have a mechanical issue with the latch, lock cylinder or linkage, and there may be a separate electrical issue with the electric release. You're most likely going to need to get the trim panel off for inspection and to get the liftgate open.

Do you know what is wrong with the lock cylinder?