Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Tapping noise from the engine. 93k auto. 300 2010. I've

Customer Question
Tapping noise from the...

Tapping noise from the engine.

Mechanic's Assistant: How many miles are on the car? Is it an automatic or a manual transmission?

93k auto

Mechanic's Assistant: What is the model/year of your Chrysler?

Customer:(###) ###-####

Mechanic's Assistant: Are you fixing your 300 yourself? What have you tried so far?

No, I've taken to a shop. I'm being told they think it is the rocker arm but they cant be sure until they tear the engine down. They're estimating 1,800 t0 2,000.

Submitted: 1 year ago.Category: Chrysler
Show More
Show Less
Ask Your Own Chrysler Question
Answered in 4 minutes by:
6/29/2017
Chrysler Mechanic: Brad, Dealership Technician replied 1 year ago
Brad
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 8,252
Experience: 19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)
Verified
Good afternoonDo you have the HEMI? Have you pulled the valve covers yet?
Ask Your Own Chrysler Question
Chrysler Mechanic: Brad, Dealership Technician replied 1 year ago

Do you still need help?

Ask Your Own Chrysler Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a chrysler mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Brad Your Own Question
Brad
Brad
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 8,252
8,252 Satisfied Customers
Experience: 19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)

Brad is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

541 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

549 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

948 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

412 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Related Chrysler Questions
Lifter tapping noise on my 2011 Chrysler 300. Just started a
Lifter tapping noise on my 2011 Chrysler 300. Just started a week ago. … read more
Expert
Expert
30 satisfied customers
It makes a TICKING noise at startup that stops and starts
it makes a TICKING noise at startup that stops and starts again intermittently until the engine warms up - then it stops completely … read more
Mechanic01
Mechanic01
3,148 satisfied customers
I have a ticking noise even after i had all the rocker arms
I have a ticking noise even after i had all the rocker arms replaced … read more
Brad
Brad
Dealership Technician
8,252 satisfied customers
2008 300 3.5l loud tapping sound from valve cover area runs
2008 300 3.5l loud tapping sound from valve cover area runs good noise some times quiets down other times louder have read about possible "rocker arm problems " if possible would like to have some ins… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
879 satisfied customers
I have a ticking and knocking noise I tried using engine
HI I have a ticking and knocking noise I tried using engine flush then oil change with high mileage oil but did not help I put specific engine treatment for lifter noise but still nothing helps. I bel… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
Chrysler carivan: 2000 dodge caravan 3.o liter bad ticking
2000 dodge caravan 3.o liter bad ticking on number one cylinder tore down and roll motor over by hand cant see anything by eye or slop in rocker arms scanner says number one cylinder… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
696 satisfied customers
Chrysler Town & Country Limited: The transmission on my
The transmission on my 2003 T&C 3.8 FWD was scrap when I bought it. I bought a salvage yard transmission from the same model with 30k miles on it. When I got everything back together...first time I he… read more
tim37857
tim37857
Mechanic
High School or GED
71 satisfied customers
Chrysler 300M: RE: 2000 Chrysler 300M, 3.5 HO V6. We just
RE: 2000 Chrysler 300M, 3.5 HO V6. We just did a short block exchange. Cleaned everything thoroughly, back together. Started an ran for a couple of minutes. Sounds like the valve Tappets are not getti… read more
tim37857
tim37857
Mechanic
High School or GED
71 satisfied customers
Chrysler Pacifica: 2004 Chrysler Pacifica 3.5 AWD valvetrain
2004 Chrysler Pacifica 3.5 AWD valvetrain noise. This car has about 165k. Oil light is on, rev limiter kicks in at about 4000 rpm and the engine has a fair amount of valve train noise. Are there any i… read more
tim37857
tim37857
Mechanic
High School or GED
71 satisfied customers
Chrysler Pacifica Touring: tim i had to replace heads, broke
tim i had to replace heads, broke exhaust valves, might as well say timing belt broke but it didnt. didn't know about interference motor. tapped engine over to line upmarks, bad move on my part.new he… read more
Brad
Brad
Dealership Technician
8,252 satisfied customers
6 Chrysler pacifica: 2004 3.5L V..engine started..Oil light..restarted
I have a 2004 3.5L V-6 Chrysler Pacifica FWD. The engine started making clanking noise, like a sewing machine running or seven cartoon characters with ball peen hamers having a party. The Oil light di… read more
ND-TECH
ND-TECH
Chrysler/Jeep/Dodge specialist tech
Vocational, Technical or Trade Scho
955 satisfied customers
2.4: Rocker arm and rocker arm assembly is making noise/cladder.
I'm still having a problem with the Sebring 2.4 engine. Rocker arm and rocker arm assembly is making noise/cladder. this was wed. 02/15/12. I have two mechanics look at the problem. Both have agreed t… read more
heavy_chevy_396
heavy_chevy_396
Vocational, Technical or Trade Scho
2,518 satisfied customers
First start..(not the injectors)then it goes away after a mile or two
i just got a 2010 300 3.5 with 31000 miles. when i first start it in the morning it sounds like something is tapping (not the injectors)then it goes away after a mile or two.what could this be and how… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1996 Chrysler: valve covers..rotated..adjuster..one exhaust that
I'm working on my 1996 Chrysler LHS. I have a tappet noise so I've removed the valve covers and rotated the motor and checked the lash at each adjuster. I have one exhaust that is completely killed. S… read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
879 satisfied customers
convertable..SHAFTS RUN..ENGINES..ROCKER ARM BOLTS OFF AS A UNIT.
I HAVE A 1966 PLYMOUTH FURY CONVERTABLE 318 ENGINE WHICH NEEDS NEW VALVE SEALS. THE PROBLEM IS I HAVE NEVER RAN INTO ROCKER ARMS THAT THE SHAFTS RUN THROUGH THE HEADS. THE ENGINES I'VE WORKED ON THE R… read more
moparfl
moparfl
Vocational, Technical or Trade Scho
2,958 satisfied customers
2006 Chrysler Pacifica: 000 miles..tapping..Dealer says it
I have a 2006 Chrysler Pacifica with 47,000 miles. The engine just started making a tapping/ticking sound. Dealer says it is a rocker arm problem. Why would this happen on a vehicle with this low mile… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
97 chrysler: van with 3.3 v6..Was overheated and heads cracked.
97 chrysler van with 3.3 v6. Was overheated and heads cracked. Replaced heads. Now has a knocking sound. Sounds like a sheet metal sound. With a long screwdriver placed on the engine and the other end… read more
JerryG
JerryG
Vocational, Technical or Trade Scho
18 satisfied customers
2006 chrysler 300 Touring: 000 miles..tapping noises..hood..louder
I am being told that I must replace both rocker arm assemblies on my 2006 chrysler 300 Touring with 37,000 miles on it (just outside warranty time). This was based on me bringing it in based on tappin… read more
sprinkles08
sprinkles08
Technician
High School or GED
11 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x