How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 23002
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

New battery fob not working put key in the ignition no

Customer Question

New battery fob not working put key in the ignition no lights on dash by putting on jumper cables get odometer lights but if you turn key lights go out and no start
JA: Have you checked the fuses? The dashboard bulbs?
Customer: 2002otcrusier no power no nothing when key is turned new fully charged battery the odometer lights up if you put jumper cables on but go out as soon as you turn the key
JA: What is the model/year of your Chrysler?
Customer: 2002
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: New battery checked ISO fuse. New heads on battery cables
JA: Anything else you want the mechanic to know before I connect you?
Customer: Key fob panic and door locks don't work
Submitted: 8 months ago.
Category: Chrysler
Customer: replied 8 months ago.
Pt cruiser limited 2002
Customer: replied 8 months ago.
Also test fob battery all is good.
Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

If the vehicle is electrically dead and then a jump start restores some power then that would indicate a battery or connection issue.

The battery was replaced after this problem began and the symptoms didn't change at all?