How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 35601
Experience:  #@ years in the Automotive repair field.
Type Your Chrysler Question Here...
Ron is online now
A new question is answered every 9 seconds

The code P0700 and P0562, Both of those codes came up, 2002

Customer Question

the code P0700 and P0562
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: Both of those codes came up
JA: What is the model/year of your Chrysler?
Customer: 2002 300M
JA: Are you fixing your 300M yourself? What have you tried so far?
Customer: I want to fix it myself but don't know where to start.
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 8 months ago.
Category: Chrysler
Expert:  Ron replied 8 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 8 months ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here. The code P0700 means that there is a trouble code stored in the Transmission Control Module (TCM) and the TCM requests the MIL be turned on. These codes can cont be retrieved with a code reader and require a full scan tool. The code P0562 indicates Battery Sense Circuit Low Voltage concern. In order to determine what is causing this code you are going to need to do some testing. I have enclosed the factory steps to do this in the link below.