How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22690
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

After replacing turn signal switch the whole thinb I

Customer Question

after replacing turn signal switch the whole thinb I replaced a relay fuse there on it now it wont start whats wrong now
JA: How many miles are on the car? Has the car been starting normally?
Customer: Im not for sure .It been starting fine till then what do I need to do
JA: What is the model/year of your Chrysler?
Customer: 2003 model something edition
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: yes Ive just replaced that and it would start after wards tried to jump start but wouldnt
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 8 months ago.
Category: Chrysler
Expert:  david craig replied 8 months ago.

Hi Im David, you're going to need to be a bit more specific than a 2003 something. and what relay and fuse did you change?

Expert:  david craig replied 8 months ago.


Expert:  david craig replied 8 months ago.

do oyu still need assistance???????

Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

There are many things that can cause a no start condition, especially depending on what is happening and what the vehicle is. It will take some testing to determine what is going on.

What model is the vehicle and what engine do you have?

What happens when trying to start the engine?