How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 23000
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

It wont start even with a jump, They look normal to me, 2.4

Customer Question

it wont start even with a jump
JA: Have you checked the battery, particularly the terminal connections? Are they corroded?
Customer: They look normal to me
JA: What is the model/year of your Chrysler?
Customer: 2.4 lt
JA: What year is your Chrysler?
Customer: 2013
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: I tried two times giving it a jump
JA: Anything else you want the mechanic to know before I connect you?
Customer: Lights work everything turns on ac radio.. Just wont start
Submitted: 11 months ago.
Category: Chrysler
Expert:  sprinkles08 replied 11 months ago.

Hello and welcome to JustAnswer!

There are quite a few things that will cause a no start condition. I'm assuming that the starter does not engage. The problem could be with the starter itself, ignition switch, it could be a SKIM related issue, the powertrain control module may not be awake, it could be an issue with the transmission range sensor, wiring, cables and connections.

Is there any noise from the engine compartment when trying to crank it?