How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad, Dealership Technician
Category: Chrysler
Satisfied Customers: 7946
Experience:  19 Yrs Chrysler/Dodge Technician..ASE Master Certified(L-1)
Type Your Chrysler Question Here...
Brad is online now
A new question is answered every 9 seconds

I use alldata and armed with the same articles you have here

Customer Question

I use alldata and armed with the same articles you have here and still had to break the booster to pedal push rod to to get it out.
The other half of Sunday could not install the booster cannot get it egr mounting surface and strut tower
Here it is monday bought a new floor jack, took out front engine
mounting bolt (left side of block at radiator) tried rolling the engine in park, i gained an inch still cant get the A1 Cardone / napa booster in there.
I think tomorrow I will hook up cub cadet and try for 2 inches on the engine roll.
I will have missed 2 days of work and have pulled engines easier than this
Submitted: 10 months ago.
Category: Chrysler
Expert:  Brad replied 10 months ago.

Welcome to JustAnswer!!! My name is***** will be helping you with your question today...

Expert:  Brad replied 10 months ago.

What is your question? How to get the booster out?

Customer: replied 10 months ago.
I have done figured out how to put the booster back on you have to undo the auxiliary lines off the right Bank of the engine up against those up and hold them off and then you still have to be in one of the heater core pipe I did this almost 24 hours ago I've done about finished the job now I'll start to put it back together thanks
Expert:  Brad replied 10 months ago.

Ok glad you got it fixed...