How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22802
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

My engine wont crank, lots of battery, steering wheel didnt

Customer Question

My engine wont crank, lots of battery, steering wheel didnt lock when paarked
JA: Have you checked the fuel supply? And are all the spark plugs working?
Customer: Its a duel propane and gas motor. lots of both
JA: What is the model/year of your Chrysler?
Customer: 2011 Dodge Laramie 5.7 litre 4x4
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: tried to get the steering wheel to lock. And tried a battery pack just incase the battery was low. No effect.
JA: Anything else you want the mechanic to know before I connect you?
Customer: No
Submitted: 10 months ago.
Category: Chrysler
Customer: replied 10 months ago.
Take your time. I found the answer online in the Dodge Forum.
Expert:  sprinkles08 replied 10 months ago.

Hello and welcome to JustAnswer!

There are may possible causes for a no crank condition. The powertrain control module may not be awake, you could have a bad wireless ignition node, it could be a trans range sensor related issue, wiring, the TIPM, cables, connections, or the battery. It will take some testing to determine exactly what is going on.

Do you hear any noise from the engine compartment when trying to start it?

Related Chrysler Questions