How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 23101
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Won't start. Just clicking and flashing lights. The dash,

Customer Question

Won't start. Just clicking and flashing lights.
JA: Where exactly do you think the noise is coming from? And how long has this been going on?
Customer: The dash, maybe computer. First time
JA: What is the model/year of your Chrysler?
Customer: 2007 limited w/ hemi
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: Trying to figure out why. Unhooked battery, let sit, reconnected. Nothing. Put battery on charger, said it was at 80% charged.
JA: Anything else you want the mechanic to know before I connect you?
Customer: ??
JA: What confuses you?
Customer: My aspen.
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

There are quite a few things that can cause a no start condition but it sounds as if you have a dead battery or possibly a cable or connection issue. If you're hearing a rapid clicking when turning the key to the crank position it's because of low battery voltage available to the starter.

Do you have a digital voltmeter?