How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 522
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I have a 2011 Chrysler Town and Country Van. Hard rough

Customer Question

I have a 2011 Chrysler Town and Country Van. Hard rough starting -- ETC Light comes on.Been at dealer. They kept it couple days and did not have trouble starting. It sat for three days and when I tried starting it, it did the same thing.
Submitted: 1 year ago.
Category: Chrysler
Expert:  david craig replied 1 year ago.

Hi Im David and thanks for visiting the site:

There is a service bulletin regarding this.

NUMBER: 05-001-10

GROUP: Cooling

DATE: February 16, 2010

ETC Light Illuminated Or Diagnostic Trouble Code P2122 And/Or P2127 Set OVERVIEW:
This bulletin involves disconnecting the wire harness clip near the ETC Sensor.


20010 (RT) Town & Country/Grand Caravan (Includes International Markets) NOTE :This bulletin applies to vehicles equipped with power adjusting pedals with or without memory (Sales code XAP or XAM) built before September 17, 2009 (MDH 0917XX).


Some customers may experience an ETC light illumination. Upon further investigation the Technician may find that DTC's P2122 -Accelerator Pedal Position Sensor 1 Circuit Low and/or P2127 - Accelerator Pedal Position Sensor 2 Circuit Low have been set. This condition could be caused by the wiring to the APP sensor being held too tight, causing the wiring to become loose resulting in the ETC light illumination.


Using a Scan Tool (wiTECH(TM) or StarMOBILE) with the appropriate Diagnostic Procedures available in TechCONNECT, verify the adjustable pedal system is functioning as designed. If DTC's are present other then the ones listed above record them on the repair order and repair as necessary before proceeding further with this bulletin.

Expert:  david craig replied 1 year ago.

you can ask the dealer if they are aware of this service bulletin.

Expert:  david craig replied 1 year ago.

just checking in to see how its going?