How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 522
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Engine light on steady, not blinking. Car stalls and

Customer Question

Engine light on steady, not blinking. Car stalls and sputters on occasion. Have replaced sensors on tranny 2 o2 sensors, plugs, pvc valve, gas filter. Light goes out for awhile then back on. When it stalls. Turn off & re start no problem. but wife is scared to drive it PT 2005 turbo cruise 137kms. Thanks Dave.
JA: Is the check engine light on? Does the car stall at idle or when driving?
Customer: Light is now on. Stalling when starting up say on an incline or turning from laneway on to raod.
JA: What is the model/year of your Chrysler?
Customer: 2005 2.4 turbo convertible.
JA: What year is your Convertible?
Customer: 2005
JA: Are you fixing your Convertible yourself? What have you tried so far?
Customer: No my mechanic has tried various things. replaced 2 o2 sensors, Pvc valve, gas filter, at least one plug & electrical sensors on tranny replaced $562.
JA: Anything else you want the mechanic to know before I connect you?
Customer: Could it be a wire from the cam sensor shorting out?
Submitted: 11 months ago.
Category: Chrysler
Expert:  Eric replied 11 months ago.

HI,

Ok, what are the current fault code numbers?

Customer: replied 11 months ago.
I have no idea.
Expert:  Eric replied 11 months ago.

HI,

Ok, can you call your mechanic and find out? They will be Pxxxx codes - example - P0720

There are over 500 fault codes that can set the check engine light. Without knowing which ones are set, it would be a wild guess on anyone's part

Customer: replied 11 months ago.
Eric I will call Robert. I only drive the damn thing. Will get back to you asap. Thanks Dave.
Expert:  Eric replied 11 months ago.

HI,

Ok, sounds good and I am here every day so when you post the codes, I will be able to go from there