How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 522
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

2005c Class hemi 5.7 v8...I'm looking for what these codes

Customer Question

2005c Class hemi 5.7 v8...I'm looking for what these codes are C2100 C1070 Im finding that C2100 is low bat. voltage? I just put brand new bat. in and Im still getting booth these codes... the car starts right up then just imediatly dies
JA: Do you have a scan tool to read the codes?
Customer: yes its reading C2100 and C1070
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: oops its actually C107C
JA: Anything else you think the mechanic should know?
Customer: possibly.... I've only plugged in and got the codes at this point.
Submitted: 11 months ago.
Category: Chrysler
Expert:  Jared D replied 11 months ago.

The c2100 could just be stored in the system from the battery change. We see that often when we change batteries on Chryslers. You could reset the code with a scan tool to make sure it doesn't reset.

The C107C is a brake pedal switch code. This usually sets when the brake pedal switch is defective.

Neither of these codes explain why it is starting and stalling though. When did that start? Before the battery replacement or after?