How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22802
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Just my shifter would not shift so I replaced the part with

Customer Question

Just my shifter would not shift so I replaced the part with the spring . now my Key will not Release
JA: Does the vehicle have a fuse that enables or disables the shifter?
Customer: A ffuse came out I think .but were does mit go
JA: What is the model/year of your Chrysler?
Customer: 05 pacifica
JA: Are you fixing your Pacifica yourself? What have you tried so far?
Customer: Fix it my self..were dose the fuse go
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 11 months ago.
Category: Chrysler
Expert:  sprinkles08 replied 11 months ago.

Hello and welcome to JustAnswer!

If the key won't turn to the lock position it's either an interlock issue or the transmission isn't fully in park. The problem is going to be directly related to the repair that was done and is most likely a problem in the shifter.

Was shifter or interlock cable adjustment changed?