How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 522
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

My eas bas light is on, Yes, 200I chrysler aspen, 2008, I

Customer Question

My eas bas light is on
JA: Has the light been on for some time?
Customer: Yes
JA: What is the model/year of your Chrysler?
Customer: 200I chrysler aspen
JA: What year is your Aspen?
Customer: 2008
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I havent really tried anything
JA: Anything else you think the mechanic should know?
Customer: The car with the squiggly lines also came on And I recently got my rack and pinion and tie rods replaced
Submitted: 1 year ago.
Category: Chrysler
Expert:  Chad Farhat replied 1 year ago.

Hi, I'm Chad ,Welcome To JustAnswer, I'm reviewing your question and I will be be posting a replay ASAP

Expert:  Chad Farhat replied 1 year ago.

you have a fault code in the abs system , could be number of things

we need to have the abs module scanned for fault codes with a gm scanner or equivalent that can read the abs module ,just a code reader want to do .

1- wheel speed sensor , there is one on each wheel, abs module itself faulty etc.. the diagnostic scan will retrieve a fault code number that we can look in the car troubleshooting data to see what needs to be checked on the system .

the 2 s wiggle lines you see are telling you the traction control is off line , and there is also could be a fault in that system , so the scan will help us identify that too.

Please let me know

Thank You

Chad Farhat

ASE Certified Technician