How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22649
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I replaced the ignition switch & actuator and it still wont

Customer Question

I replaced the ignition switch & actuator and it still wont start
JA: Have you checked the battery, particularly the terminal connections? Are they corroded?
Customer: Had a locksmith come try to recode key and he couldnt because the computer interface isnt working
JA: What is the model/year of your Chrysler?
Customer: 2006 chrysler 300 base. lights come on they they go off
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: My husband replaced the ignition switch and actuator pin. The lights come on then they go off. Still wont start
JA: Anything else you think the mechanic should know?
Customer: Thats it. Battery is good
Submitted: 11 months ago.
Category: Chrysler
Expert:  sprinkles08 replied 11 months ago.

Hello and welcome to JustAnswer!

There are many things that will cause a no start condition and it will take some electrical testing to determine exactly what is going on. You could simply have a bad starter, it could be a blown fuse or power distribution issue, wiring, the powertrain control module may not be awake due to an internal failure or a loss of power or ground.

Does the fuel pump run and throttle body do a self test when the key is first turned on?