How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems
Category: Chrysler
Satisfied Customers: 3446
Experience:  Owner at Carolina Auto Service & Sales , 20 years Experience in Foreign & Domestic Vehicles .
Type Your Chrysler Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

Hot air is blowing from the ac. actuator has been replaced

Customer Question

hot air is blowing from the ac. actuator has been replaced as well as the as control panel, what is wrong? and how do i fix it?
JA: Have you checked the coolant level? Have you checked the hoses for leaks?
Customer: coolant has been checked as well. no apparent leaks.
JA: What is the model/year of your Chrysler?
Customer: 2006 300 2.7 ltr
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: replaced the actuator. control module, filled the coolant, still blowing hot air.
JA: Anything else you think the mechanic should know?
Customer: no
Submitted: 1 year ago.
Category: Chrysler
Expert:  Chad Farhat replied 1 year ago.

Hi, I'm Chad ,Welcome To JustAnswer, I'm reviewing your question and I will be be posting a replay ASAP

Expert:  Chad Farhat replied 1 year ago.

1- is the a/c compressor engaging when comanded on and with compressor running , you still have hot air is that correct ?

2- a set of a/c gauges needs to be hooked to the vehicle , with running and a/c running , what are you readings on the low side gauge 30 to 50 psi and the high side gauge 150 to 175 psi

3- when installed a/c , did change compressor only , got a kit with filter drier ?

Please let me know

Thank You

Chad Farhat

ASE Certified Technician

Expert:  Chad Farhat replied 12 months ago.

Please let me know if you need anything else on it

Hope I was helpful to you

A Positive Rating is Much Appreciated

This Post Will Stay Open for You To Come back And Ask me Any Follow Up Question You May have.

Thank You

Chad Farhat
ASE Certified Technician