How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22811
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Well it turns over it just won't start, The ETClights on,

Customer Question

Well it turns over it just won't start
JA: Does the engine turn over? How old is the battery?
Customer: The ETClights on
JA: What is the model/year of your Chrysler?
Customer: 2011 town&country
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Nothing yet I got in my other car and went about my day . That was yesterday today it needs to be fixed
JA: Anything else you think the mechanic should know?
Customer: And yes I'll be ding the work
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chrysler Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Chrysler
Customer: replied 1 year ago.
I'm very busy , I guess you are too thanks anyway
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

There are quite a few things that can cause a no start condition. You may be missing spark due to a number of reasons such as a bad crank sensor or a wiring issue. It could be an ASD circuit issue, you could be missing fuel pressure due to a failed pump or loss of power or ground to it. An exhaust restriction or fuel contamination will also cause a no start condition.

The first step in diagnosing the problem is to use a scan tool or code reader to see if any fault codes have set. Do you know if there are any codes present?

Related Chrysler Questions