How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22672
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

200 convertible does not work at message when

Customer Question

200 convertible does not work at message when pulling or pushing down on the console button and my trunk is closed and the folding space is in place for the safety switch.
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If you get no message on the instrument cluster when pressing the top switch then the switch itself is a likely cause for the problem, but it's also possible that the power top control module is not awake.

Was the top working fine up until this point?

Did the problem start after any work was done, a jump start, etc?

Customer: replied 1 year ago.
Did not do a jump start. I still have a full waranty and trying to save a trip to the dealer. Is there is no ways to test or confirm where is the problem ?
Expert:  sprinkles08 replied 1 year ago.

Diagnosing the problem would require testing. Do you have a scan tool capable of communication with the power top control module?

Customer: replied 1 year ago.
No thank you
Expert:  sprinkles08 replied 1 year ago.

Have you tried a battery disconnect?

Related Chrysler Questions