How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 518
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Brake lights don't work, even after switch was replaced. Fuse

Customer Question

Brake lights don't work, even after switch was replaced. Fuse ok
JA: Working brake lights are so important for a safe drive. Luckily, the mechanic I'm going to connect you with will have just the tips you need for a quick fix. Tell me a bit more about what's going on so he can help you best.
Customer: Brake lights don't work. Replaced the switch. Same problem. Turn signals work ok.
JA: Are you hoping to fix this yourself?
Customer: Yes
JA: Great! What have you tried so far?
Customer: Replaced the brake switch, and checked the 20 amp fuse.
JA: Is there anything else the Chrysler Mechanic should be aware of about your Chrysler?
Customer: No
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chrysler Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Chrysler
Expert:  Dave Nova replied 1 year ago.
What year and model is your Chrysler?
Customer: replied 1 year ago.
2002 Town & Country LX
Customer: replied 1 year ago.
Haven't received any response???
Expert:  Dave Nova replied 1 year ago.
Looking at schematics. I'll be right back with you.
Expert:  Dave Nova replied 1 year ago.
Double check fuse 26. If this fuse is good, check for voltage on the gray wire at the brake switch.