How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 22670
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I need to know which fuse controls my brake lights please,

Customer Question

I need to know which fuse controls my brake lights please
JA: Tell me a bit more about what's going on so he can help you best.
Customer: Brake lights not working blinkers a re
JA: Are you hoping to fix this yourself?
Customer: Yes
JA: Great! What have you tried so far?
Customer: Nothing need to know the fuse number so I can check it
JA: Is there anything else the Chrysler Mechanic should be aware of about your Chrysler?
Customer: My husband just replaced a wheel bearing
JA: Our top Chrysler Mechanic is ready to take your case. Just pay the $5 fully refundable deposit and I'll fill the Chrysler Mechanic in on everything we've discussed. You can go back and forth with the Chrysler Mechanic until you're 100% satisfied. We guarantee it.
Submitted: 1 year ago.
Category: Chrysler
Expert:  Dodgerench replied 1 year ago.

Hi, welcome to JustAnswer!. This is Ed.

I'll need to know the make, model and year of your vehicle to give you a fuse location.

If you're not sure of any of these, just shoot me the last 8 digits of the VIN and I'll be able to decode it from here.

Thanks and talk shortly,


Customer: replied 1 year ago.
Chrysler sebring 2008
Expert:  Dodgerench replied 1 year ago.

Thanks. Be right back.

Expert:  Dodgerench replied 1 year ago.

That would be Fuse 3 in the underhood TIPM fuse and relay center. It's a 10-amp unit.

It feeds the brake switch directly, with output being split between a straight feed to the Center High-Mounted Brake Lamp/ CHMSL (or 3rd brake lamp) and the other leg going into the TIPM to signal the TIPM to switch brake lamp output to both sides.


Customer: replied 1 year ago.
Not the fuse can you send me the part number for the break switvh?
Customer: replied 1 year ago.
Fuse is fine,
Expert:  Dodgerench replied 1 year ago.

That looks to be a 05083344AA switch. I don't have a part price, but expect it to be under $30.

Customer: replied 1 year ago.
Thank you!
Customer: replied 1 year ago.
Replaced the break switch still no break lights ( the deck break light is workin) no power to the bulb sockets on the sides though.
Expert:  Dodgerench replied 1 year ago.

Sorry, but this has escalated to a diagnostic situation. Scan tool information is required for inputs to the TIPM for brake lights, side to side. I'll opt out to open the case to other experts.

Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

Was the switch adjustment lever rotated after the switch was installed?