How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Chrysler
Satisfied Customers: 23117
Experience:  ASE Master & Advanced level certified, Chrysler Master Certified, Trans and Hybrid Specialist
9825021
Type Your Chrysler Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Imprper closing of top on 2006 sebring conv

Customer Question

imprper closing of top on 2006 sebring conv
Submitted: 1 year ago.
Category: Chrysler
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If it's falling at the end of the closing cycle it's because the weight of the top is overcoming hydraulic resistance. The most likely cause would be low fluid.

After the cylinders were replaced and fluid added, did you cycle the top 10-15 times checking the fluid level regularly and have ensured that it is full now?

Customer: replied 1 year ago.
Will check with my mechanic who installed new cylinders and ensure if installation followed your procedure
of 10-15 cycles of raising/lowering top while checking fluid level.
Will attempt to have this done ASAP and get back to you with results. Thank you for your initial input
Jim MILLARD
Expert:  sprinkles08 replied 1 year ago.

You're welcome!

Customer: replied 1 year ago.
Pls call ASAP. THANKS
Expert:  sprinkles08 replied 1 year ago.

I'm unable to talk on the phone.