Chrysler

Chrysler repair questions? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Chrysler Questions
I'm trying to put it back in time. 2008 Chrysler Pacifica
Yes I lined up all the marks but the car won't turn on not sure if it's because we moved the positions to clean them … read more
Ron
Ron
ASE Certified Technician
Vocational, Technical or Trade Scho
419 satisfied customers
Just replaced the head gasket Set the timing TDC and cam
Just replaced the head gasket Set the timing TDC and cam marks lined up rotated if 2 revolutions. Timing marks all lined up repeated same results, will not start so I did a compression test 30 psi all… read more
Kevin
Kevin
workshop foreman /master tech/mot tester
3,161 satisfied customers
On a 2001 2.7 seabring,when thetimeing marks are all
On a 2001 2.7 seabring,when thetimeing marks are all aligned, at what position is the # ***** piston ? Is it at top-dead center on the compression stroke - the exaust stroke or 60 * after !!!… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
12,661 satisfied customers
I have 2002 sebring 2.7 liters. I have replaced the cylinder
I have 2002 sebring 2.7 liters. I have replaced the cylinder head. The intake manifold is not yet install. I accidently removed the crankshaft gear therefore lost the timing mark. I cannot get TDC. Wh… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
8,021 satisfied customers
Chrysler PT Cruiser Touring: 06 pt cruiser, pulled engine to
06 pt cruiser, pulled engine to replace crankshaft do to thust bearing failure. Now have engine vibration like crazy.… read more
Dave Nova
Dave Nova
Auto Dealership Owner
Associate Degree
17,291 satisfied customers
Chrysler Pacifica: How do I get a 2005 Chrysler Pacifica 3.5
How do I get a 2005 Chrysler Pacifica 3.5 L back in time if the timing belt was removed without marking the correct position? and the cramshaft was possible turned around?… read more
George H.
George H.
ASE Master Technician
Associate Degree
19,403 satisfied customers
Chrysler Pacifica Touring: Iam working on my 2007 pacifica
Iam working on my 2007 pacifica 4.0 and in the process of putting new water pump and timing belt. On my instructions that came with the kit it said to put it on #1 on compression and loosen rocker arm… read more
Alex
Alex
Automotive Technician
Associate Degree
1,153 satisfied customers
Chrysler PT Cruiser: Hi I have a 2002 Pt Crusier, 2.4 liter
Hi I have a 2002 Pt Crusier, 2.4 liter engine. I replaced the water pump and timing belt. I need to know if the marks on the two upper crankshafts need to line up DIRECTLY straight across from each ot… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
Chrysler Pacifica Touring: I have a 2007 Pacifica with the
I have a 2007 Pacifica with the 4.0L. I dove into the timing belt and ambitiously removed the tensioner before marking the crank and cams at TDC. I heard a 'pop', if yo will, when I loosened the timin… read more
Alex
Alex
Automotive Technician
Associate Degree
1,153 satisfied customers
I have a 2002 Chrysler pt cruiser and it does not start wen
I have a 2002 Chrysler pt cruiser and it does not start wen I take off the cam sensor harnes I got spark out of the plugs but wen I fixed the harnes back to the sensor I dnt get the sparks from the pl… read more
Chris
Chris
15,110 satisfied customers
2007 PT crusier..two hours later, car will crank but will not start
2007 PT Crusier, Ran car this morning to store, came out to leave from house again about two hours later, car will crank but will not start.… read more
Tim\u0027s Auto Repair
Tim\u0027s Auto Repair
Mechanic
High School or GED
14,655 satisfied customers
2004 chrysler pacifica: replace the timing belt and water pump..3.5l
I need to replace the timing belt and water pump on a 2004 chrysler pacifica with a 3.5l engine. What are the procedures to do this?… read more
Eric
Eric
Retired
N/A
33,582 satisfied customers
blow..new timing belt..intake..you think that the cam censer is
i have a 2006 pt cruzer i blow the head gasket and the car turned off i replace the head gasket and put a new timing belt in and it will not start everything is top dead center it acks like it wants t… read more
Jim
Jim
Vocational, Technical or Trade Scho
1,491 satisfied customers
PT Cruiser: cylinder..timing belt..crankshaft at tdc..camshaft marks
I have my 2001 2.4 cylinder PT Cruiser tore apart to replace the timing belt. The belt did not break but I believed jumped time, as it quit running and the belt is loose with teeth missing. I'm at the… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
11,548 satisfied customers
Retime 2.4L pt crusier engine after timing belt broke..TDC
How to retime 2.4L pt crusier engine after timing belt broke. TDC and timing gear marks are not aligned when new belt is installed.… read more
Anthony
Anthony
Master Automobile Technician
Vocational, Technical or Trade Scho
11,778 satisfied customers
I have a 2002 Dodge Intrepid with a 2.7 liter engine. I had
I have a 2002 Dodge Intrepid with a 2.7 liter engine. I had a water pump failure; I replaced it, the timing chain, guides, and tensioner. The timing chain marks are aligned properly (60 deg after TDC,… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,065 satisfied customers
2003 sebring: Litre engine..The water pump went out ,and I..timing
i own a 2003 sebring w/ 2.7 Litre engine. The water pump went out ,and I replaced it, but could not get the timing right .I took it to a mechanic & he said that all 6 intake valves were bent on right … read more
Matt Hardy
Matt Hardy
Master Auto Repair Technician
Associate Degree
919 satisfied customers
2003 PT-Cruiser: timing belt..Crankshaft Position..alignment
I am having issues installing the timing belt on a 2003 PT-Cruiser. I pull code P0016 - Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A. I am not sure of the finished alignment. 3r… read more
Mopar Certified
Mopar Certified
Vocational, Technical or Trade Scho
11,548 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

Thank you so much for your answer. My initial estimate was $325; I got it done for $100 - part and labor.

Lynn B.Ormond Beach, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

545 satisfied customers

Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

Chris (aka - Moose)

Chris (aka - Moose)

Technician

568 satisfied customers

16 years of experience

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

118 satisfied customers

ASE Master Tech 20+ Years

Ivan

Ivan

ASE Certified Master Technician

56 satisfied customers

ASE Master Tech w/ 20+ years in the field. Self employed for 9 years. Member of AUTOLAB radio show.

Amedee

Amedee

Chrysler Technician

956 satisfied customers

ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector

Jerry

Jerry

Master Mechanic

696 satisfied customers

ASE Master tech. 30+ years mechanic, shop forman, service manager

Ron

Ron

ASE Certified Technician

419 satisfied customers

#@ years in the Automotive repair field.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x