How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don - Mo Lurch Your Own Question
Don - Mo Lurch
Don - Mo Lurch, Aftermarket & Factory Electronics
Category: Chrysler
Satisfied Customers: 21045
Experience:  Cert. Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
Type Your Chrysler Question Here...
Don - Mo Lurch is online now
A new question is answered every 9 seconds

2005 chrysler crossfire, trying to figure out how to remove

Customer Question

2005 chrysler crossfire, trying to figure out how to remove center dash to remove the airbag module from the car
Submitted: 1 year ago.
Category: Chrysler
Expert:  Don - Mo Lurch replied 1 year ago.

You posted "2004 & 2005"......? which is it?
Which Airbag Module are you referring to?
Driver, Passenger or Control Module?

Customer: replied 1 year ago.
i have an airbag light on with the code "Internal ORC failure" so i wanted to get to the control module to remove and replace
Customer: replied 1 year ago.
2004 model, sorry
Expert:  Don - Mo Lurch replied 1 year ago.

thank you for the added info........


Control Module is located under console

1.Disconnect the negative battery cable (2). Wait two minutes for the system capacitor to discharge before further service.
2.Remove the center console.
3.Disconnect the occupant restraint controller harness connector (2).
4.Remove the bolts (1) attaching the occupant restraint controller to the transmission tunnel.
5.Remove the occupant restraint controller from the vehicle.

Here is Console removal
Click Attachment below